310x310mm – High Temp (140C) Magnetic Base – EZFlex Pro
$17.99
-
Works great for long-term use at temperatures up to 140C! Genuine 3M Adhesive Backing Pre-Applied to Magnetic Sheet Pre-Cut to size (you can also cut a larger magnet to a smaller bed size).
NOT meant for printing directly on, only for use with the EZFlex Pro – Dual Sided Black Textured PEI Flex Plate or other spring steel plate on top of it.
42 in stock
Description
Specifications
- 1mm thick magnet for high strength
- Genuine 3M 300LSE Adhesive Pre-Applied
- Rated up to 140C Bed Temperature
- This is for the MAGNET ONLY. You still need a plate and we carry them here: EZFlex Pro – Dual Sided Black Textured PEI Flex Plate
- Magnets can be trimmed or cut easily with a knife or scissors so order a size larger than your bed if you do not see your exact size, then cut to fit
Readme
- Do NOT print directly on the magnet. You must have a flex plate on top of it to use this on your printer.
- Do NOT peel the adhesive off with the backing. Make sure you are ONLY peeling the backing paper with the 3M marking on it and not the adhesive as well.
- If you accidentally peel the adhesive off put it back on the magnet and press firmly across the entire magnet. Then use the tip of a knife or something tiny to pull just the backing paper off.
- Before installing make sure your printer bed is CLEAN and free of any debris
- Install directly on your printer bed (aluminum or glass if it is permanently attached)
- Be sure to select the correct size. TH3D is not responsible if you order the wrong size for your printer bed
- Do NOT leave liquids on the magnet or place a plate on the magnet if it is not dry and clean
- Corner style of magnet sheet may vary from picture
Reviews (2)
2 reviews for 310x310mm – High Temp (140C) Magnetic Base – EZFlex Pro
Add a review
Additional information
| Weight | 26 oz |
|---|---|
| Dimensions | 12 × 12 × 0.2 in |
| Made In | 🇨🇳 China w/QC in 🇺🇸 USA |
| Warranty Length | 6 Months |
David W. (verified owner) –
This is a perfect pairing with the PEI metal flex sheet for My CR-10s printer. Perfect size. No trimming required. Thank You.
Kyle Willcockson (verified owner) –
The magnetic base was easy to install on my CR-10S. I did not have to trim the magnet. Just peel off the protective cover for the adhesive back and install!