EZOut V2 Filament Sensor Kit for Ender 5/5 Pro – V1.1.X Board

Why do you want this upgrade?

Have you ever run out of filament during a print? Now you don’t have to worry! When you get the EZOut board and the filament sensor (add on above) you feed the filament through our sensor and when it runs out the printer will wait for you to load more filament into the printer so you can resume the print! Absolutely ZERO soldering is required to install this. Works with the V1.1.X Creality Boards. Included cable is 1 meter long, we also sell 200mm extensions.

Installation Information

Plug the adapter into your board PCB on the LCD header, connect the LCD screen to our board, plug one end of the sensor cable into the adapter PCB and the other end into the sensor. Update your board with the firmware linked below.

Use the Creality “Melzi” board here: https://tickets.th3dstudio.com/help-guides/article/discontinued-unified-2-firmware-downloads

You need a bootloader on your board to use this product.

You can add on a bootloader kit above and there is a very easy to follow guide with a video on our page here: 1284p Printer Bootloader Flashing Video Guide – CR-10/Ender 2 3 5/Wanhao i3/Anet

FAQ

• Will my beeper still work after installing this?
  • No – the pin used for the signal pin was originally used for the beeper.
• Why is there a pin missing on the header?
  • This is removed so the pin does not connect to the LCD after installation and is completely normal.

DIY Pricing: Support Not Included
To keep our part prices as low as possible, this item does not include technical support.

Need help installing or troubleshooting?
We offer paid Priority Email Support and Live Expert Consultations starting at just $35.

Have a V1.1.X board? You need a bootloader.