TH3D High Amp 12V/24V MOSFET V2 Installation Information and Mounts

Voltage Jumper There is a voltage jumper on the module, make sure to set the voltage jumper to the printer voltage. This is a universal part for any 3D printer with a 12V or 24V DC heated bed. Printed Parts Compatible with this product https://www.thingiverse.com/thing:2976220 https://www.thingiverse.com/thing:2861113 https://www.thingiverse.com/thing:2847097 Installation notes If you are using a mount […]

P.I.D. Bed Calibration Guide

This article is for bed tuning. For hotend tuning see here: P.I.D. Hotend Calibration Guide What is P.I.D. Tuning? PID (Proportional Integral Derivative) is the system the printers use for holding a set temperature. This system controls how fast the printer reaches the set temperature and how well it holds that temperature once it gets there. […]

COEX Filaments – Recommended Nozzle and Bed Temperatures

Recommended Nozzle Temperatures: COEX PLA and PLA Prime: 215°-235° C COEX ABS and ABS Prime: 230°-250° C Recommended Bed Adhesion Information and Temperatures: PLA and PLA Prime: 0°-60° C Painter’s tape is recommended for unheated beds, adhesive is optional at the user’s discretion. Heated bed temperature recommendation is 60° C. Works with Kapton tape, PEI […]