Tough Tube for Bambu X1/P1S/P1P AMS Compatible – 2.5mm ID/4.0mm OD – Smooth Feeding, Long Lasting PTFE Tubing
$6.99
-
50% thicker tubing walls than Capricorn. Replace your basic Bambu tubing with our long lasting, smooth feeding Tough Tube. Custom made specifically to work as a drop in replacement for the stock PTFE tubing including in the AMS. Works with no issues unlike other PTFE tubes on the market as it’s made to the same OEM diameters. Also works great for direct drive printers as a reverse bowden tube to guide filament.
463 in stock
| Quantity | Discount | Price |
|---|---|---|
| 4-10 | 10% | $6.29 |
| 11-Unlimited | 15% | $5.94 |
Description
Made from 100% Virgin PTFE, no re-grind, with high temp additives. Made from high quality PTFE with additives for low friction and heat resistance – Internal Diameter of 2.5mm (± 0.05mm), Outer Diameter is 4.0mm. 1 quantity = 1 meter of tubing. Cut with a PTFE cutter.
Tubing Lengths Required for P1/X1/AMS Setups
X1/P1S – Order 2 Meters
- 1x 370mm
- 2x 550mm
P1P – Order 2 Meters
- 2x 530mm
- 2x 30mm
AMS Internal – Order 1 Meter
- 2x 230mm – Bay 1/4
- 2x 195mm – Bay 2/3
PLEASE NOTE THAT TUBING IS SENT IN ONE PIECE THAT IS THE TOTAL LENGTH THAT IS ORDERED. FOR EXAMPLE: This means that if you order 3 meters you will get ONE piece that is 3 meters long.
Reviews (6)
6 reviews for Tough Tube for Bambu X1/P1S/P1P AMS Compatible – 2.5mm ID/4.0mm OD – Smooth Feeding, Long Lasting PTFE Tubing
Add a review
Additional information
| Made In | 🇨🇳 China |
|---|---|
| Warranty Length | 6 Months |
Related products
JOHN TETREAULT (verified owner) –
I was printing a piece tonight, and without warning, filament stopped feeding and instead spewing out the back of my AMS through a hole that the carbon fiber filament had worn through the filament guide tube. So glad I had ordered some Tough Tube a couple weeks ago… You never know when the existing tube is going to wear through. I took advantage of the sale today to order 6 more meters to keep on hand.
darksidecreations7 (verified owner) –
I replaced all tubes on my Bambu X1C and from the AMS to the X1C. Has worked very well. I ordered more to replace all PTF tubes inside all my 8 AMS’s
Adam Shiver (verified owner) –
Like this PTFE tubing, but my one complaint is it not being pre-cut to length. Ordering this product in multiples just results in loooonger section of PTFE tubing.
Matthew Cunningham (verified owner) –
Bought a short amount to replace the part in the print chamber on the Bambu Lab X1-Carbon. More PTFE started getting thin so I order more of this and replace it all the way into the AMS so far. It has been working great. Doesn’t seem to be any resistance and no issues with filament being fed or retracted through it at all!
Jesse James McGuire (verified owner) –
Installed on x1c and AMS.
So far no pull back errors !
Installs easy and looks great!
Win Win!
tcwaters (verified owner) –
This PTFE is working great on my Bambulab X1CC!!!