Review from The Edge of Tech
Actual Pictures of the Lighting kit installed on our X1C
Also check out this awesome wire management print from our customer Gillithonnen on MakerWorld
https://makerworld.com/en/models/387626#profileId-288234
$13.99
-
Upgrade your lighting to see better inside your printer. Plugs into the stock LED port, replacing your stock light. V2 kits include self-sticking cable clips for wire management.
Each LED segment is connected with premium silicone wire and allows for placement on the left, rear, and right inside the printer. Total power draw is 0.42A. Click here for the Installation Guide
Available on Backorder (more info)
Title | Quantity | Price |
---|---|---|
Bulk Discount - High Margin Items | 0 - 3 | 0% $13.99 |
Bulk Discount - High Margin Items | 4 - 10 | 10% $12.59 |
Bulk Discount - High Margin Items | 11 - 19 | 12% $12.31 |
Bulk Discount - High Margin Items | 20 - 29 | 14% $12.03 |
Bulk Discount - High Margin Items | 30 + | 18% $11.47 |
Review from The Edge of Tech
Actual Pictures of the Lighting kit installed on our X1C
Also check out this awesome wire management print from our customer Gillithonnen on MakerWorld
https://makerworld.com/en/models/387626#profileId-288234
Weight | 4 oz |
---|---|
Dimensions | 3 × 2 × 0.2 in |
Made In | 🇨🇳 China |
Warranty Length | 6 Months |
All Products
All Products
All Products
Bambu Parts
All Products
Bambu Hardened Steel Nozzles – 0.2mm 0.4mm 0.6mm 0.8mm – Works with TH3D Upgraded Hotend
designerpatrick (verified owner) –
Super easy to install and can actually see the build plate now
john mcalpine (verified owner) –
https://www.printables.com/model/836760-th3d-led-bambu-labs-x1-carbon-light-strip-clip
I recommend mounting to the front and the sides, not the back.
Tim Hoogland –
Nice mod for the kit man! Really like it!
valp666 (verified owner) –
Super design. Very easy to install. Tim’s created great function and value. A must have for the X and P printers. Also note that so far I have had no issues with Lidar and auto-configurations due to the increased light. But it is possible so test at your own convenience.
I also bought a bag of JST 1.25 mm male and female pigtails on amazon and made a y-connector so I run this mod along with the factory LED.
Gillithonnen (verified owner) –
Significant improvement for lighting! Literally night and day difference. I’m looking forward to seeing the Y-connector to reconnect the stock lighting, because with the LEDs above the head unit, it does cast shadows and it seems like there is a dark spot near the camera.
I’ve also went and made a channel for the corner above the exhaust port in lieu of the wire clips provided in the kit. https://makerworld.com/en/models/387626#profileId-288234
smuffca (verified owner) –
I just ordered it and am looking forward to receiving. Only criticism is why is there LEDs on the back and two sides, but not for the front. You should offer that, only makes sense.
Tim Hoogland –
Thanks for the feedback! You can experiment with other positions if you like. The ones in the guide are the best locations for wire routing and staying out of the way of the moving parts we found.
g6gun (verified owner) –
Not yet received, however question about a “Y-harness” is to be in the works connecting original stock light also. Great support.