EZCam HD – 1080p, Manual Focus, Wide Angle

What is so special about the EZCam HD?

The EZCam HD is specced out with 3D printer users in mind. We’ve used and sold the Logitech cameras for a while now but wanted something that offers better picture quality and features. The lens is a manual focus so you can lock in on your printer bed to get a crisp, clear picture without worrying about it changing.

Many webcams on the market have fixed focus or autofocus that make getting your printer bed that is close up hard to do without modification or advanced command-line configuration in Octoprint. Many cameras with autofocus struggle to keep in focus when mounted on a printer.

Inside the camera, we have a glass lens with an IR filter, a 1080p CMOS sensor, and hardware MJPEG encoding. This means that it delivers a clear image with minimal load on your Raspberry Pi CPU. The base that is normally used to set it on a computer monitor is easily detachable to attach the camera itself to a variety of mounts that we have designed so you can attach it to your printer bed mounts or frame easily.

Directions

Plug in the camera with your Pi kit off, then boot up your Pi kit. If you plug it in with the kit on, reboot the Pi kit. The camera will not be detected by OctoPrint/EZPi setups if you plug and/or unplug it when the Pi is already booted.

---

STL Files For Mounting Where the camera attaches to the base there is a nut and screw inside that is accessible when you remove the plastic circles covering the ends. This bolt and nut are used to mount the camera to the STL files we designed for this camera. Included STL File Mount List:

• TH3D Solid Bed Mount Adapter Part
• Ender 5/Ender 5 Plus Corner Mount
• General 2020 Extrusion Mount Arm

Download EZCam STL Mounting Pack

---

Tech Specs

• 1080P 30FPS Sensor
  • Good low light performance
• Real GLASS Lens w/IR Filter
  • Clear picture with durability
• Manual Focus Adjustment
  • Get your bed in focus without taking the camera apart or complicated command line settings!
• Wide Angle View
  • See more of your printer bed than standard webcams
  • 104° Degree FoV
• Compatible with OctoPrint and EZPi Setups
  • Just plug it in and restart your Octoprint Pi
• USB Connectivity w/3FT Cable
  • Easy to route on your printer vs ribbon type cameras
  • Easily extendable with standard USB extension cables if you need it longer
• The base is weighted and has a standard “tripod” 1/4″ thread mount in the bottom.

STL files to mount this camera to our Solid Bed Mounts as well as standard 20mm size extrusion available above.

---

Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:

• Email Support: $35 per ticket
• Remote Video Call with PC Access: $40 for 30 minutes | $60 for 60 minutes

Get help when you need it! Click here to contact us to get paid support.

Weight	5 oz
Dimensions	3.5 × 6 × 2 in
Made In	🇨🇳 China
Warranty Length	6 Months