EZPi V4.0 Octoprint SD Image – Digital Download – Works on Pi 3B, Pi 3B+, and Pi 4B Boards

There are no refunds on digital downloads. Future updates are included as we release them until the image is discontinued. If you want to get technical support, you must add it on above.

Important Info For Building Your Kit

• Use a PROPER AC power adapter, NOT a phone charger.
• Use a NAME BRAND MicroSD card. We usually use 32GB+ cards from Kingston, Lexar, Patriot, PNY, and Sandisk.
• Use a Class 10 speed or better card for best performance.
• Pi 4 boards should have ACTIVE cooling on them if not using a proper fanless case.

Flashing your SD Card

Recommended Flashing Tool: https://www.balena.io/etcher/

1. Download the image from your TH3D Account
2. Extract the IMG file to your PC
3. Select the IMG file in Balena Etcher
4. Select your SD card
5. Click Flash
6. Once done, put in the EZPI kit and turn it on. Allow 5 minutes for 1st boot.

DIY Pricing: Support Not Included
To keep our part prices as low as possible, this item does not include technical support.

Need help installing or troubleshooting?
We offer paid Priority Email Support and Live Expert Consultations starting at just $35.