- 312-858-8433
- 10AM-6PM CST M-F
Used on the heatbreak to improve thermal transfer of heat from the heatbreak to the cold end heatsink
Helps with heat creep and reduces jamming in all metal heatbreaks
$3.99
In stock
High Thermal Conductivity (>1.114W/M-K)
Temp range: -50C-240C – NOTE: Cold side of the heatbreak where this paste is used does not get nearly as hot as the nozzle.
Weight: 0.3G per Packet – This is for 2 packets of thermal paste
Before assembling the hotend apply thermal paste to the OUTSIDE of the heatbreak before threading/inserting it into your heatsink.
Wipe away thermal grease that oozes out before fitting the heater block to the heatbreak.
| Weight | 0.02 oz |
|---|---|
| Dimensions | 1 × 1 × 0.1 in |
| Made In | 🇨🇳 China |
| Warranty Length | SOLD AS-IS, NO WARRANTY |
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Hours – M-F 10AM to 6PM CST | Closed Weekends
Phone – 312-858-TH3D(8433)
Address – 840 S. Lake Park Ave, Hobart, IN 46342
In-Person By Appointment ONLY
I used it in an all-metal hotend with a titanium heatbreak. So far so good.