MKS 3MOS Module – Addon 3 FANs to your Board

This module repurposes a stepper socket to 3 extra MOSFETs that can handle up to 2A each. It pulls power from the board VMOT pin to power the fans and uses the EN, STEP, and DIR pins from the stepper socket to turn on/off the mosfets.

This is a DIY part so no technical support is included with this product. YOU MUST HAVE AN OPEN AND NOT USED STEPPER DRIVER SOCKET TO USE THIS.

If using the MKS Monster 8 V2 and our Unified 2 Firmware there are extra options in the firmware to use this in the DRIVER7 (the last one) position on the board.

Specs

• Voltage – 12-24V
• 3 Outputs
• Compatible with:
  • Any motherboard supporting 5 axes or more with an open stepper driver socket.
  • MKS Robin V1.x, V2, V3
  • MKS Gen-L V1, V2.x; MKS Gen 1.x
  • MKS SGen-L V1, V2
  • MKS Monster8 V1, V2
• Control Signals (uses Stepper Driver Pin Layout): 
  • EN = FAN1
  • STEP = FAN2
  • DIR = FAN3
• Firmware Settings – Example
  • #define FAN1_PIN PA8
    #define FAN2_PIN PA9
    #define FAN3_PIN PA10
  • NOTE: If your board has more than one pin you may need to change the FANX_PIN name to higher numbers

Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:

• Email Support: $35 per ticket
• Remote Video Call with PC Access: $40 for 30 minutes | $60 for 60 minutes

Get help when you need it! Click here to contact us to get paid support.