Upgraded 8mm Leadscrew Coupler
$6.99
Removes Z axis Play from “Flex/Spring” type couplers
Separates in a nozzle crash, or if your Z axis binds up to prevent damage to the machine.
EVEN clamping around leadscrew and Motor Shaft
Compatible with printers that have 8mm Leadscrew and 5mm Motor Shaft
Sold in quantities of one.
Guaranteed Compatible with printers listed below in the description.
In stock
Removes Z axis Play from “Flex/Spring” type couplers
Separates in a nozzle crash, or if your Z axis binds up to prevent damage to the machine.
EVEN clamping around leadscrew and Motor Shaft
Compatible with printers that have 8mm Leadscrew and 5mm Motor Shaft
Sold in quantities of one.
Guaranteed Compatible with the below printers
- Alfawise U10
- Sovol SV01/SV02/SV03
- CR-10 (All sizes)
- CR-10S (All sizes)
- CR-20
- CR-10 V2
- CR-10S Pro
- CR-10S MAX
- Tevo Tarantula Pro
- Tevo Flash
- Tevo Tornado
- Ender 2/3/3V2/4/5/5 Plus/6
- Anet A8
- Anet A6
- Anet E10
- Anet E12
- Anet ET4/ET5
- Tronxy X3
- Tronxy X3S
- Tronxy X5S
- Voxelab Aquila
Coupler Separating?
See our help center article here: Leadscrew Coupler Separating – TH3D Studio LLC
Warranty Information 3 Months Warranty -Â Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link. Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.
Share your thoughts!
Let us know what you think...
One review with a 4-star rating
Related products
Daniel Linthicum (verified owner) –
I originally left a 2 star due to some issues I was having with this part. I corrected some of what was causing the issue. It’s been working pretty well on my 3s and 5s. What impressed me most was, that after I left the review, they reached out and legit tried to help me solve it. Very cool!
(0) (1) Watch Unwatch
Tim Hoogland –
If the coupler is separating while the Z axis is moving, it’s due to the machine binding up, not the coupler. These are designed to separate if there is binding and/or your nozzle crashes into the build plate to prevent damage. Your eccentric nuts may be too tight on the Z axis and/or you have an alignment issue on the Z axis and/or X axis that’s preventing it from moving smoothly.
(3) (0)