12864 LCD Display w/Cables & SD Slot – For EZBoard/MKS/SKR Boards
$22.99
Full Graphics LCD Controller w/Full-Size SD Reader, Includes 2x 12″ 10 Pin LCD Cables
White text on a blue background
Perfect LCDs – All LCDs are pre-tested by us so you get a working LCD every time.
In stock
Full Graphics LCD Controller w/Full-Size SD Reader
Control your printer with NO PC required
Includes 2x 12″ 10 Pin LCD Cables
For use with the EZBoard the Dual Cable LCD adapter is required.
White text on a blue background for LCD
PCB color may vary from photo depending on batch
Note: Due to varying Board/LCD/Cable Header direction if the LCD does not light then rotate the plug end at ONE END (LCD side or board side) 180 degrees and plug it into the header. Do this for both EXP1 and EXP2 if the LCD does not light.
How to flip the cable ends: 12864 LCD Screen Not Lighting Up – TH3D Studio LLC
DIY Part Fitment/Installation/Wiring This is a universal DIY 3D printer part. That means it will work on almost any 3D printer, but you must know what you are doing. Our technical support does not cover selecting/designing/assisting in firmware setup and/or 3d models to install this part on your printer. If purchased as part of a kit from TH3D for a particular printer, then it will be covered under the kit when using our firmware package. Electrical replacement parts usually will require you to splice wires into your existing ones for the part you are replacing (soldering and heat shrinking wire splices is recommended for proper connection). Some of our universal electrical parts come with bare wire ends or plugs on them. These ends may or may not directly plug into your 3D printer. If they do not, you will need to splice the wires into the existing ones on your 3D printer.
Warranty Information 3 Months Warranty - Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link. Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.
Share your thoughts!
Let us know what you think...
What others are saying
Related products
spudmlgnjr (verified owner) –
This is a awesome screen and what a great price. Thanks TH3D
(1) (0) Watch Unwatch
Jared Ostergaard (verified owner) –
Ordered this screen to replace a Zonestar rotary. It works great the only issue I had is with the cable headers. I had to pull them off and rotate the slots downward “wrong orientation” to work on the bigtreetech skr 1.3.
(0) (0) Watch Unwatch
TH3D Employee Tim Hoogland –
The SKR actually has their headers “wrong” compared to all the other boards like RAMPS and the MKS Gen/SBase series. I suspect they did it to match all the other 12864 LCDs that are assembled wrong coming out of China.
(4) (0)
Question
pc.deman –
Is this display plug and play with th3d EZBoard lite 1.2?
(0) (0) Watch Unwatch
Tim Hoogland –
It works with it but you need the Dual Cable LCD adapter board with it. You can find that adapter here: https://www.th3dstudio.com/product/ezboard-creality-dual-lcd-adapter-board/
(1) (0)
Question
Craig Williams –
I’ve got the EZBOARD installed in my Ender 3. Would this work with my printer?
(0) (0) Watch Unwatch
Tim Hoogland –
While this LCD would work (you would also need the accompanying LCD adapter board) you should just replace your stock LCD with the OEM creality one. We carry the OEM Creality LCD here: https://www.th3dstudio.com/product/creality-12864-oem-lcd-screen-cr-10-ender-3-ender-5-more-single-dual-cable-compatible-exp1-exp2-exp3-cables-included/
(0) (0)
Question
creality (verified owner) –
Can this be used on a stock ender 6?
(0) (0) Watch Unwatch
Tim Hoogland –
This 12864 is not compatible with the Ender 6. The LCD you want to get for the Ender 6 is this one here: https://www.th3dstudio.com/product/ender-6-12864-lcd-conversion-kit/
(0) (0)
Question
glenlakemusic.jk (verified owner) –
is this compatible with the CR10 s5? I bought 1 from you a long time ago and never used it. Now my display(the button) crapped out. Or should I just order the original LCD? Thanks!
(0) (0) Watch Unwatch
Tim Hoogland –
This is not 100% since it uses different mounting holes and the other parts are not in the same location. You would want to use this LCD instead: Creality 12864 LCD
(1) (0)
Question
3d-2109 (verified owner) –
I just received my order today and this LCD was one of the items. I had to reverse the #1 connector only to get it to light up. My problem is, the knob doesn’t do anything when rotated. The push button on the knob works, but not the rotation. Thoughts?
(0) (0) Watch Unwatch
Tim Hoogland –
Both cables must be reversed, not just one. See the article here: https://support.th3dstudio.com/helpcenter/12864-lcd-cable-connections-correct-and-incorrect-connection-pictures-included/
(1) (0)