Delrin V Slot Wheel - 5mm Bolt Hole (2 Pack) Subtotal: $4.99
TH3D Uno Bootloader Flashing Kit for 8-Bit Boards
$19.99
- Arduino Uno R3 Compatible Board
- 1.5ft Blue USB 2.0 Cable
- 10X Female to Female Dupont Jumper Wires
- 5X Female to Male Dupont Jumper Wires
- Drivers here: CH340 Drivers
- Follow the guide here to flash your board: http://Bootloader.TH3DStudio.com
In stock
Arduino Uno R3 Compatible Board
1.5ft Blue USB 2.0 Cable
10X Female to Female Dupont Jumper Wires & 5X Female to Male Dupont Jumper Wires
USB Drivers: CH340 Drivers
Follow the guide here to flash your board: http://Bootloader.TH3DStudio.com
PLEASE NOTE: Due to the nature of this product (aka people using it once to flash their bootloader) returns are not accepted once opened.
Technical support is limited to flashing ONE printer and/or board per bootloader kit. Additional printers/boards will require a separate technical support charge if you wish to get support on more than one printer to flash with this kit. – We have had to institute this policy as some customers abused support to flash dozens of printers and demand support on every single one while only purchasing one kit.
| Weight | 4 oz |
|---|---|
| Dimensions | 6 × 6 × 2 in |
Q & A
There are no questions yet
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related products
(3)
$8.99
(2)
$8.99
(13)
From: $13.98
Sale!
(3)
From: $21.57
I bought this product while trying to flash my CR-10 Melzi board but needed to add a bootloader. Found the TH3D Bootloader and flashing guide, bought this and everything went flawlessly! Included a bunch of cables for what I needed it for. Easy guide and quick bootloader and flash guides on their youtube channel! Will definitely buy from here again!
i was doing upgrades on an ender 3 and ender 3 pro and had to flash a boot loader on this kit made that very very easy to do….i had never did that before and this kit along with the great you tube video you did Tim helped me put the unified firmware on them..
I soft bricked my creality 1.1.5 board and was thing i would need a new motherboard. I did some research and found that Tim and the crew had the perfect kit i needed to fix my printer. I appreciate that they took the time to include every item i needed. Tim also did a very easy to follow video for the boot loader.
Bootloader worked. The tutorial videos were helpful and made it so much easier to upgrade the firmware.
I got an Ender 3 Pro for Christmas, but once I realized that the thermal runaway protection wasn’t enabled on my firmware, I knew I had to get an update ASAP. The Uno kit arrived quickly, and with only one minor hitch (OSX Sierra needed an extra driver to properly recognize the board) I was able to get the bootloader and new firmware installed on my printer. The video instructions are great. The kit is a great and affordable resource if you don’t happen to have cables and Arduino on hand.
TH3D Uno Bootloader Flashing Kit is exactly what should be the first purchase with any Creality based 3D printer. Like many other TH3D products this kit provides everything you need to upgrade your firmware and make your system safer in the process when partnered with TH3D unified firmware.
The team goes out of their way to collect the best product and this is exactly whats needed to make your system better.
A friend had done the Pi version of this and I almost went that route. But for the money and the ease of finding instructions, I went this route. Glad I did. Straight forward with provided instructions and videos available on the process. Opened up the true potential for Ender 3 upgrades as well as basic safety features. DO IT!
Kit was great and very easy to follow along. Did this on an Ender pro 3 so had to access from the bottom but no big deal. Some steps took a little longer then the video said to expect so be patient. Just getting into 3D printing and am liking what these folks are doing. Nice to know I now have thermo protection, wife would really be pissed if I burned down the house. Thanks TH3D!
I’ve never done any type of 3D printer modifications. This worked great. I followed the instructions here along with YouTube videos for the Ender 3. Fiddled for a while with a Mac, and then eventually got it working from my Linux system. I think if I would have been on Windows it would have been faster but that’s ok. I think the TH3D products have worked as advertised. Now onto adding the EZABL system!
I’ve never touched an Arduino board before, but thanks to the all in one kit and the amazing documentation and video walkthroughs I was able to flash a bootloader and upgrade my Ender 5’s firmware in about 30 minutes.