50mm Sealed Bearing Fan (12V)

(2 customer reviews)
  • Direct replacement for internal control box fan
  • Longer life than stock fans
  • Uses a sealed mag-lev bearing from Sunon/CUI
  • Tech specs are below

If you do not want to splice wires with a traditional soldering iron and heatshrink make sure to check out our Quick Solder connectors for a super easy way to connect and splice wires.

$9.99

11 users have this item in wishlist

Only 4 left in stock

Recommended Accessories:

UY Style Wire Quick Connectors - 3 Pack

If you purchase our quick connectors, you can install fans without soldering quickly and easily!

We do recommend that if you can solder to install your fans that way but if you do not know how to solder or are in a pinch these connectors are a quick, solderless way to connect your fans.

You can check out our how to use them HERE

Quick Solder Wire Connectors - For Fans, Thermistors, and other Small Wires (22-26 AWG) - 5 Pack - Solder Seals

Make splices quick and easy with our new Quick Solder Wire Connectors. Just use a heat gun to solder and heatshrink wires quickly and securely. This little 5 pack is enough for 5 wire splices and works great for fans, thermistors, leds, and more. Designed for wire gauges ranging from 22-26awg.

We also carry a bulk pack for small and large wires.

Description

Compatible Machines:

  • CR-10 and CR-10S – ALL Sizes
    • Internal Control Box Fan

Installation Notes:

  • Be sure to check the polarity on the wires you are connecting our fans to. Typically red is positive and black is negative but some of the Chinese printers do not adhere to these standards.
    • There is no list of what machines use what as it can vary from model to model and we have even seen differences in wiring colors used in the same printer models.
  • Our fans use red for positive and black for negative. You can verify polarity with a cheap $10 multimeter from Amazon or you local hardware store.
    • If fans are shorted out/killed due to improper wiring this is NOT covered under warranty.
  • When replacing a fan you will want to splice into the existing wire to your existing fan. Connect the wires with solder and heatshrink OR use our Quick Solder connectors.

Manufacturer’s Tech Specs:

  • Airflow: 13.8 CFM (0.386m³/min)
  • Static Pressure: 0.150 in H2O (37.3 Pa)
  • Noise: 30-35 dB(A)
  • Voltage: 12V DC
  • Bearing Type: Sunon Vapo-Bearing™ or CUI OmniCOOL – Sealed MagLev Bearings
    • CUI OmniCOOL bearings are the same as Sunon Vapo-Bearings
  • Size: 50x50x10MM
  • RPM: 5500
  • Wire Length: 6″

Part Fitment/Installation

This is a universal 3D printer part. That means it will work on almost any 3D printer (check your printer voltage and part voltage) with the correct mount for your specific machine. Thingiverse is a wonderful place to locate mounts and we also have printed parts in our shop for some universal parts.

It is up to you to determine and select a mount for your specific printer model (or design one) to install this part on your machine and wire it up to your machine (if applicable). You are welcome to Contact Us for recommendations for your particular printer model for mounting options that are available online if searching yourself does not yield any results.

Additional information

Weight 1 oz
Dimensions 3 × 3 × 1 in
Made In

🇨🇳 China

Warranty Length

6 Months

2 reviews for 50mm Sealed Bearing Fan (12V)

  1. James Z. (verified owner)

  2. bktransactions (verified owner)

    Replacing the stock fans with this fan coupled with the other two really quieted down the fan noise from my CR-10 control box which was really annoying. I recommend buying the kit of three and saving some $.

Add a review
SHARE YOUR CART