Creality CR-10S Pro V1/V2 12864 LCD Conversion/Upgrade Kit
$45.96
All the parts to add a 12864 LCD to you CR-10S Pro with NO soldering at all. Simple setup and firmware update included in our Unified Firmware to support the new LCD Get all the features you are missing out on with the Touch Screen. Bundle for replacing the LCD and upgrading the stock ABL sensor to our EZABL Kit available. LCD + EZABL Upgrade Kit Available Here Technical support is included should you need assistance installing the LCD kit.
Description
What is included?
- All the parts to add a 12864 LCD to your CR-10S Pro with NO soldering at all.
- ABS LCD Housing
- Screws for the 12864 LCD
- TH3D CR12864 LCD Adapter Board
- TH3D 12864 LCD
- Note: SD slot on LCD is not used, the SD slot on the printer board is what you will still use
- Cables for the 12864 LCD
- Simple setup and firmware update included in our Unified Firmware to support the new LCD
- Get all the features you are missing out on with the Touch Screen
- Babystepping Z (Live Z Adjustment)
- Full ABL Probe Offset and other settings
- EStep Settings
- Acceleration/Jerk Settings
- Firmware has Thermal Runaway Protection
Will this work with Klipper?
Yes, these LCDs and the stock board are supported by Klipper firmware. However, due to the complexity of Klipper, our technical support that is included does NOT apply if you are using Klipper firmware. Technical support only applies when you are using our Unified 2 Firmware package that is included.
Inside View
Installation Video
Installation Notes
Reviews (1)
1 review for Creality CR-10S Pro V1/V2 12864 LCD Conversion/Upgrade Kit
Add a review
Additional information
CR-10S Pro LCD Case
| Weight | 4 oz |
|---|---|
| Dimensions | 4 × 4 × 2 in |
| Made In | 🇺🇸 USA (with 🇺🇸 USA and 🌎 Global Materials) |
| Warranty Length | 6 Months |
TH3D 12864 LCD Screen
| Weight | 6 oz |
|---|---|
| Dimensions | 4 × 4 × 1 in |
| Made In | 🇨🇳 China w/QC in 🇺🇸 USA |
| Warranty Length | 6 Months |
Unified 2 Firmware for CR-10S Pro
| Update Length | 3 Months |
|---|---|
| Firmware Package | Creality Ramps Printers |
| Made In | 🇺🇸 USA |
CR-10S Pro 12864 Adapter Board
| Weight | 3 oz |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Made In | 🇺🇸 USA (with 🇺🇸 USA and 🌎 Global Materials) |
| Warranty Length | 6 Months |
LCD Mounting/Housing Screws - 8 Pack
| Weight | 1 oz |
|---|---|
| Dimensions | 0.5 × 0.5 × 0.5 in |
| Made In | 🇨🇳 China |
| Warranty Length | SOLD AS-IS, NO WARRANTY |
Related products
Dana K. (verified owner) –
TH3D makes things so much easier