Made from a high temp copper alloy (max temp is 500C) & Plated with our Tough Plating for wear resistance and a smooth filament flow. Print at higher speeds due to up to 3X the heat transfer of brass nozzles and over 6X the heat transfer of steel nozzles.
Tested in-house to stand up to the occasional use of abrasive filaments like Carbon Fiber and Glow in the Dark (for regular use we still recommend steel or hardened steel nozzles).
These nozzles conduct heat so well that it is recommended to lower your normal printer temperature by 10C. 60-degree internal nozzle angle for optimal filament flow.
Installation Notes
These nozzles are copper which means they can break easier during installation than brass or steel nozzles. Do NOT over-tighten them when installing them. Apply as much pressure when tightening as you can with ONE finger. Always heat the hotend to 240C when removing and installing nozzles.



Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:
- Email Support: $25 per ticket
- Remote Video Call with PC Access: $30 for 30 minutes | $50 for 60 minutes
Get help when you need it! Click here to contact us to get paid support.
13 reviews for EZFlow Nozzles – Copper, High-Flow, & Wear-Resistant – MK8, V6, SP (Spider), Volcano – 0.4mm 0.6mm 0.8mm 1.0mm
There are no reviews yet.