High Amp 12V/24V MOSFET V2 – Heated Bed or Hotend

(5 customer reviews)

$9.99

  • High Amp HA210N06 FET
  • Rated up to 30A @ 12V-24V DC
  • Large Screw Terminals
  • Includes 6″ Control Wire – Connection from MOSFET to Printer Board
  • Wiring Diagram Below
  • Recommended Printed Mounts Below
  • Need power wire? Click here for our 1 Meter 12 Gauge Power wire pack.

In stock

Purchase this product now and earn 10 Benchies!

Product Info

Upgrade your heated bed to heat quicker (if you have a stock MOSFET or none at all) with our high amp MOSFET board. You can use this with heated beds or hotends (if you are wanting maximum protection). This will handle up to 30A at 12V-24V. Compatible with PID regulation (used in our firmware). Works with the CR-10 printers and any other machine that runs on 12-24V on the board and heated bed. Make sure to set the voltage jumper to the printer voltage. Works on 12V or 24V.

CR-10 Mounting notes: Use the basic mounting plate below and glue the plate with hot melt or super glue between the rear 40mm fan and the control board. This will allow for proper cooling of the MOSFET.

  • High Amp HA210N06 FET
  • Rated up to 30A @ 12V-24V DC
  • Large Screw Terminals
  • Includes 6″ Control Wire – Connection from MOSFET to Printer Board
    • The control wire input (B-CTL header) is not polarity sensitive as there is a full bridge rectifier onboard on this MOSFET board.
  • Wiring Diagram Below
  • Recommended Printed Mounts Below

Support/Warranty

Printed Parts Compatible with this product:

Installation Video:

Wiring Diagram:

If you have the V1 MOSFET with the gold screw terminals click here for the wiring diagram.

 

Best Sellers

Share your thoughts!

4.8 out of 5 stars

5 reviews

Let us know what you think...

One review with a 4-star rating

  1. Good temps, no difference to speed?

    iain.wheeley (verified owner)

    Easy installation but haven’t noticed any material change in the bed heat-up speed on my Ender 5 with EZABL. Manages rock solid temps and will go higher than stock.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up