K1 MAX Tough Panel Lid – Glass Panel Replacement – Clear and Durable Acrylic Panel
$24.99
Replace the dark, dangerous glass panel on your K1 Max with our Tough Panel. Say goodbye to shards of glass when it breaks and not being able to see your prints.
These are high quality cast acrylic laser cut panels made right here in the USA. This will be the LAST panel you will ever buy for your K1 Max!
Install in 5 minutes. Unscrew the handle from your original top lid panel and put them on ours, do NOT use the plastic grommets that are on the screws for this new lid – only use the screws. It’s that easy and 1:1 replacement of the OEM top lid panel. Read our fitment guide here.
Only 5 left in stock
Description
This is JUST for a custom cut cast acrylic replacement panel for the TOP LID for this printer. NOTHING ELSE IS INCLUDED. Your existing handle will be re-used for the new panel.
The pictures are just to show our actual Tough Panel on the printer this product page is for.
WARNINGS – READ THIS – WARRANTY WILL BE VOID IF YOU DO ANY OF THESE THINGS BELOW
- Do NOT use loctite or any thread lockers near these panels – it will damage the door.
- Do NOT use alcohol and/or acetone based cleaners to clean. Use Windex, Plexus, or Water to clean.
DIY Pricing: Support Not Included
To keep our part prices as low as possible, this item does not include technical support.
Need help installing or troubleshooting?
We offer paid Priority Email Support and Live Expert Consultations starting at just $35.
Reviews (2)
2 reviews for K1 MAX Tough Panel Lid – Glass Panel Replacement – Clear and Durable Acrylic Panel
Add a review
Additional information
| Weight | 10 oz |
|---|---|
| Dimensions | 16 × 16 × .1 in |
| Made In | 🇺🇸 USA |
| Warranty Length | 6 Months |
Related products
dalej608 (verified owner) –
Another nice upgrade for my K1 Max. The cover is flat and has great visibility, especially if you have overhead lighting. The screw hole center-to-center was a bit too narrow and did not line up well with the stock Creality handle, even without the plastic bushings. My K1 is a first gen unit so maybe Creality was mixing and matching handles or suppliers back then. I drilled the holes out slightly larger and was able to install the stock handle. it’s not a big deal, and it was easy to fix, but something to be aware of if you have a first-gen K1.
john conard (verified owner) –
It does the job i would like a little more rigid but that’s just me