Top Addons for MultiMount System

We have several accessories available for the top side of our MultiMount System. Please read below for information about the variations we offer.

---

Top Addon Accessory Types and Descriptions

Strain Relief and Clamp – This is a two-part strain relief/cable guide that attaches to the top mounting points of the MultiMount System. This includes the strain relief base and a clamp to hold the cables and PTFE tubing in place.

• Requires 2x M3x10mm screws to attach the strain relief base to the MultiMount base.
• Also requires 2x M3x12mm screws and 2x M3 hex nuts to attach the strain relief clamp to the strain relief base.

Direct Drive Mount – Tough Extruder V2 – This bracket is used to convert a Bowden setup into Direct Drive based on our Tough Extruder V2. Also works with Bondtech BMG and clones.

• Requires 2x M3x10mm screws to attach the Direct Drive Mount to the top of the MultiMount base.
• Also requires the screws from the Tough Extruder V2 to hold the extruder and motor to the Direct Drive Mount.
• This setup will also require a length of PTFE tubing to run between the hot-end and the Tough Extruder V2. Please see our installation instructions for more details.
• We highly recommend using a pancake stepper motor with our Direct Drive mount, as it both saves weight and avoids collisions with the frame on CR-10/Ender 3 style machines.

40mm Heatsink Fan Mount, Generic version – This bracket can be used to attach a 40mm fan to the MultiMount System for the purpose of heatsink cooling. The generic version of this mount sits directly in front of the hot-end’s heatsink and does not have any additional ducting, making it perfect for use with most hot-ends on the market.

• Requires 2x M3x10mm screws to attach the Heatsink Fan Mount to the MultiMount base.
• Also requires additional screws to attach the fan to the Heatsink Fan Mount. In most cases, these screws can be repurposed from the existing fan shroud.

Direct Drive Mount – Tough Extruder V2 Rotated  – This bracket is used to convert a Bowden setup into Direct Drive based on our Tough Extruder V2. Also works with Bondtech BMG and clones.

• Requires 2x M3x10mm screws to attach the Direct Drive Mount to the top of the MultiMount base.
• Also requires the screws from the Tough Extruder V2 to hold the extruder and motor to the Direct Drive Mount.
• This setup will also require a length of PTFE tubing to run between the hot-end and the Tough Extruder V2. Please see our installation instructions for more details.
• We highly recommend using a pancake stepper motor with our Direct Drive mount, as it both saves weight and avoids collisions with the frame on CR-10/Ender 3 style machines.

Direct Drive Mount – LGX Lite – This bracket is used to convert a Bowden setup into Direct Drive based on the LGX Lite from Bondtech.

• Requires 2x M3x10mm screws to attach the Direct Drive Mount to the top of the MultiMount base.
• Requires 2x M3x10mm screws to attach the LGX Lite to the Direct Drive Mount.
• This setup will also require a length of PTFE tubing to run between the hot-end and the extruder. Please see our installation instructions for more details.

Direct Drive Mount – LGX Lite Rotated – This bracket is used to convert a Bowden setup into Direct Drive based on the LGX Lite from Bondtech.

• Requires 2x M3x10mm screws to attach the Direct Drive Mount to the top of the MultiMount base.
• Requires 2x M3x10mm screws to attach the LGX Lite to the Direct Drive Mount.
• This setup will also require a length of PTFE tubing to run between the hot-end and the extruder. Please see our installation instructions for more details.

Direct Drive Mount – Sherpa Mini – This bracket is used to convert a Bowden setup into Direct Drive based on the Sherpa Mini Extruder.

• Requires 2x M3x10mm screws to attach the Direct Drive Mount to the top of the MultiMount base.
• Requires 2x M3x10mm screws to attach the Sherpa Mini to the Direct Drive Mount.

Direct Drive Mount – Orbiter V2 – This bracket is used to convert a Bowden setup into Direct Drive based on the Orbiter V2.

• Requires 2x M3x10mm screws to attach the Direct Drive Mount to the top of the MultiMount base.
• Requires 2x M3x10mm screws to attach the Orbiter V2 to the Direct Drive Mount.

---

Installation Guides and Documentation

MultiMount System Installation Guide

MultiMount Accessories Installation Guide

---

Additional Information and FAQs

Manufacturing Details – The V2 aluminum bracket is designed in the USA and Made in China for TH3D with final packing and QC done in the USA. Our MultiMount accessories are designed and printed in-house by TH3D in the USA. We use Black ABS for our printed parts.

STL Files – Our full STL Package is included with the purchase of the MultiMount System kit and our Accessories Pack bundles. The STL Package is also available for standalone purchase.

Weight	N/A
Dimensions	N/A
Accessory Type	Strain Relief and Clamp, Direct Drive Mount – Tough Extruder V2/BMG, 40mm Heatsink Fan Mount – Generic, Direct Drive Mount – LGX Lite, Direct Drive Mount – LGX Lite Rotated, Direct Drive Mount – Tough Extruder V2/BMG Rotated, Direct Drive Mount – Orbiter V2, Direct Drive Mount – Sherpa Mini
Made In	🇺🇸 USA (with 🇺🇸 USA and 🌎 Global Materials)
Warranty Length	6 Months