Tough Tube – High Temp, Tight Tolerance PTFE Tubing
$5.99
Recommend temp range 0-275C – Made from 100% Virgin PTFE, no re-grind, with high temp additives. Print high temp materials with your stock hotend or replace your bowden tubing for smoother and more accurate filament guiding.
Made from high quality PTFE with additives for low friction and heat resistance – Internal Diameter of 1.9mm (± 0.05mm), Outer Diameter is 4.0mm.
In stock
- Recommend temp range 0-275C
- Made from 100% Virgin PTFE, no re-grind, with high temp additives.
- Print high temp materials with your stock hotend or replace your bowden tubing for smoother and more accurate filament guiding.
- Made from high quality PTFE with additives for low friction and heat resistance
- Internal Diameter of 1.9mm (± 0.05mm), Outer Diameter is 4.0mm.
- Lower Friction than Standard PTFE Tubing
- Lower retraction needed due to less play in the filament path
- Each quantity is 1 meter of tubing
- PTFE Cutter Sold Here: PTFE Cutter Tool
In general using PTFE above 260C can cause “off-gassing” that can be harmful to small animals and birds, temps above 275C may shorten the life of our tubing. If you are using this in the melt zone on your printer please read the following guide on PTFE safety precautions (applies to ALL PTFE tubing, not just ours): PTFE Safety Precautions – ALL PTFE & ToughTube MSDS sheet is on that page for our tubing as well.
| Weight | 1 oz |
|---|---|
| Dimensions | 5 × 5 × 0.1 in |
| Length | 1 Meter, 2 Meters |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related products
Smooth and easy to cut – no jamming issues anymore
this is a great product that is a huge improvement over the stock bowden tube, i was able to reduce my retraction settings and print PETG with no issue after swapping to this on my ender 3 pro and since then swapped all my printers over to use this PTFE tube
Simple and easy upgrage to my Sunlu S8. You can definetly feel the difference when manually feeding filament thru it.
I love this tubing. It works well leading up to my direct drives and excels as allowing more abrasive filaments slide without binding on my Bowden printers. Stuff takes heat like a champ inside traditional PTFE hot ends. Cut flush, and ensure your fittings are in good shape, and you should not need to tweak or maintenance too often at all.
This PTFE tube is far superior to the stock one on the E3 V2. My prints seem to have improved in quality. Make sure you get TH3d’s PC4-M6 fittings as they greatly decrease the play in the bowden tube as well.
One of my first purchases for any new 3D printer. Fast shipping, and good customer service.
I have tried to buy generic PTFE tubing from other websites and they all somehow ended up failing, i finally got this for my five creality printers and i haven’t had any problems since then. I highly recommend this.