With Creality changing out CPUs on the V4 boards with no notice to their customers we’ve put together a guide on how to check what CPU you have so you can flash the correct firmware. We will have both the 256K and 512K firmware posted this week to support both processors. It is NOT recommended […]
We’ve been working on addressing the random CPU changes that Creality pushed out to its customers who purchased printers recently. We posted a few days ago about the CPU swaps happening and promised to work on a firmware update, you can read that post here. We have a build that is passing and works on […]
CPUs Swapped Out In our Discord server a user was working on their machine and was having issues with the firmware. They posted a picture of the board and it revealed a lesser STM32 part number on that board. The 4.2.2 and 4.2.7 boards have all shipped with the STM32F103 RET6 CPUs since release. Now […]
Bug Discovery Today when we were preparing for our Unified 2.33 release we discovered the compiles were failing. The cause ended up being due to the TMC libraries updating and breaking the compile for Marlin 2.0.9.1. Our Unified uses 2.0.9.1 for its code base so this was affected as well. You can fix this by […]
LiveStream Followup After the live stream, we realized we did not test the thermal runaway protection on the Mega Zero V2. While the hotend has protection on it, the bed heater does not. This is unacceptable and poses a fire hazard risk for customers of the AnyCubic Mega Zero V2. We disconnected the bed heater […]
