Fixing a Bad Bootloader If for some reason you got a bad flash on your 2560-based board, you can always bail yourself out by re-flashing the bootloader with an Arduino Uno kit and then uploading the firmware. To do this, follow our bootloader flashing guide but instead of selecting the “Sanguino 1248p” for the board, […]
This firmware is for 8 Bit based printers only. If you have a 32 Bit board or one supported by Unified 2 check out our Unified 2 Firmware site here: UF2.TH3DStudio.com Intro Thank you for checking out the Unified Firmware. Sales from our store and donations are what help fund this project and others. If this […]
Most Creality Printers use a FTDI F232R USB to Serial adapter chip for them to use USB. If you have a V1.1.4 board you will want to use the CH340 Driver instead. If you are having issues communicating with your board try installing one of the drivers below. Windows Driver FTDI F232R Windows Driver How to manually install Windows […]
Windows Download the CH340 Driver Run the CH341SER.exe file. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system. (Manufacturer’s Chinese Info Link) Macintosh CH340 for High Sierra (10.13) or Higher […]
Modifying the Fan Some Creality machines may have a large metal standoff that may not easily fit in the stock holes of some of the 40mm fans that we sell. When the fans were selected they fit the machines we had here to verify compatibility but Creality has changed their shroud design on some machines […]