TH3D Uno Bootloader Flashing Kit for 8-Bit Boards
$14.99
-
- Arduino Uno R3 Compatible Board
- 1.5ft Blue USB 2.0 Cable
- 10X Female to Female Dupont Jumper Wires
- 5X Female to Male Dupont Jumper Wires
- Drivers here: CH340 Drivers
- Follow the guide here to flash your board: http://Bootloader.TH3DStudio.com
50 in stock
Description
- Arduino Uno R3 Compatible Board
- 1.5ft Blue USB 2.0 Cable
- 10X Female to Female Dupont Jumper Wires
- 5X Female to Male Dupont Jumper Wires
USB Drivers: CH340 Drivers
Follow the guide here to flash your board: http://Bootloader.TH3DStudio.com
PLEASE NOTE: Due to the nature of this product (aka people using it once to flash their bootloader) returns are not accepted once opened.
There is NO technical support included with this product. If you wish to have technical support, you must add it on above.
Reviews (11)
11 reviews for TH3D Uno Bootloader Flashing Kit for 8-Bit Boards
Additional information
| Weight | 4 oz |
|---|---|
| Dimensions | 6 × 6 × 2 in |
| Made In | 🇨🇳 China w/QC in 🇺🇸 USA |
| Warranty Length | 6 Months |
Related products
All Products
$54.99
From: $15.98
Out of stock
All Products
$5.99
$12.99
$5.99
All Products
$12.99
Sale!
All Products
From: Original price was: $35.94.$31.79Current price is: $31.79.
Enriko M. (verified owner) –
Dylan (verified owner) –
I bought this product while trying to flash my CR-10 Melzi board but needed to add a bootloader. Found the TH3D Bootloader and flashing guide, bought this and everything went flawlessly! Included a bunch of cables for what I needed it for. Easy guide and quick bootloader and flash guides on their youtube channel! Will definitely buy from here again!
vipergtsrrt10 (verified owner) –
i was doing upgrades on an ender 3 and ender 3 pro and had to flash a boot loader on this kit made that very very easy to do….i had never did that before and this kit along with the great you tube video you did Tim helped me put the unified firmware on them..
jande1989 (verified owner) –
I soft bricked my creality 1.1.5 board and was thing i would need a new motherboard. I did some research and found that Tim and the crew had the perfect kit i needed to fix my printer. I appreciate that they took the time to include every item i needed. Tim also did a very easy to follow video for the boot loader.
Lesley (verified owner) –
Bootloader worked. The tutorial videos were helpful and made it so much easier to upgrade the firmware.
Heather Sarik (verified owner) –
I got an Ender 3 Pro for Christmas, but once I realized that the thermal runaway protection wasn’t enabled on my firmware, I knew I had to get an update ASAP. The Uno kit arrived quickly, and with only one minor hitch (OSX Sierra needed an extra driver to properly recognize the board) I was able to get the bootloader and new firmware installed on my printer. The video instructions are great. The kit is a great and affordable resource if you don’t happen to have cables and Arduino on hand.
mjbaldwin0352 (verified owner) –
TH3D Uno Bootloader Flashing Kit is exactly what should be the first purchase with any Creality based 3D printer. Like many other TH3D products this kit provides everything you need to upgrade your firmware and make your system safer in the process when partnered with TH3D unified firmware.
The team goes out of their way to collect the best product and this is exactly whats needed to make your system better.
chaoswyrm (verified owner) –
A friend had done the Pi version of this and I almost went that route. But for the money and the ease of finding instructions, I went this route. Glad I did. Straight forward with provided instructions and videos available on the process. Opened up the true potential for Ender 3 upgrades as well as basic safety features. DO IT!
Kevin Babcock (verified owner) –
Kit was great and very easy to follow along. Did this on an Ender pro 3 so had to access from the bottom but no big deal. Some steps took a little longer then the video said to expect so be patient. Just getting into 3D printing and am liking what these folks are doing. Nice to know I now have thermo protection, wife would really be pissed if I burned down the house. Thanks TH3D!
Casual- Beast (verified owner) –
I’ve never done any type of 3D printer modifications. This worked great. I followed the instructions here along with YouTube videos for the Ender 3. Fiddled for a while with a Mac, and then eventually got it working from my Linux system. I think if I would have been on Windows it would have been faster but that’s ok. I think the TH3D products have worked as advertised. Now onto adding the EZABL system!
deisbrecht (verified owner) –
I’ve never touched an Arduino board before, but thanks to the all in one kit and the amazing documentation and video walkthroughs I was able to flash a bootloader and upgrade my Ender 5’s firmware in about 30 minutes.