Creality 12864 OEM LCD Screen – CR-10/Ender 3/Ender 3 V2/Ender 5/+More – Cables Included
$24.99
This is a Genuine Creality LCD screen for their machines that use this type of LCD. See below for a compatibility list. 2 Cables are included with the LCD.
Perfect LCDs – All LCDs are pre-tested by us so you get a working LCD every time.
Out of stock
This is a Genuine Creality LCD screen for their machines that use this type of LCD. See below for a compatibility list. 2 Cables are included with the LCD. Creality LCD knob is included as well. This LCD is the latest version with the EXP1, EXP2, and EXP3 headers.
Guaranteed to work and as a direct replacement for the following machines:
- Creality Ender 3/3 Pro
- Creality Ender 3 MAX
- Creality Ender 5/5 Pro
- Creality Ender 3 V2 (with firmware update, click for details)
- Creality CR-10 Series (all models with the 12864LCD)
- Creality CR-10S Series (all models with the 12864LCD)
- Sovol SV01 (with the 12864LCD)
Also works with the Ender 3 V2 to get more access to firmware controls. See our article here on doing the swap: https://www.th3dstudio.com/hc/guides/upgrades-printer-information/ender-3-v2-swapping-to-the-12864-creality-lcd-for-more-features/
Cable Color May Vary – Length is 10″ Minimum
Warranty Information
3 Months Warranty - Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link.
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.
Share your thoughts!
Let us know what you think...
What others are saying
Related products
Question
ssmith40 –
Would this LCD work with the EZboard?
(0) (0) Watch Unwatch
Tim Hoogland (verified owner) –
Yes this will. You would use 1 LCD cable and connect it to the EXP3 header on the LCD.
(0) (0)
Question
Jalen Byon (verified owner) –
So if I want to use this screen with an Ender 3v2, and I’m using the Unified firmware, should I just define my printer as a plain 3 rather than a 3v2 in order to get the LCD to function?
(0) (0) Watch Unwatch
Tim Hoogland (verified owner) –
Yes, that is correct. See our guide here: http://support.th3dstudio.com/hc/guides/upgrades-printer-information/ender-3-v2-swapping-to-the-12864-creality-lcd-for-more-features/
(0) (0)
Question
erikdruud –
I am replacing a bad motherboard in a CR10 S4. The new motherboard is the Creality V2.2 with EXP1&2 ports. Will this display work with that motherboard?
(0) (0) Watch Unwatch
Tim Hoogland (verified owner) –
Yes, this LCD works with the V2.2 board from Creality.
(1) (0)
Question
Michael Malinowski –
Will this work as a replacement on a stock CR10S5?
(0) (0) Watch Unwatch
Tim Hoogland (verified owner) –
If your CR-10S5 came with the same style LCD (not a touch) this is a direct replacement.
(1) (0)