Creality Ender 6 12864 LCD Conversion/Upgrade Kit
$34.97
This kit replaces the stock touch LCD to give you more control and features over YOUR printer. There is also a USB passthrough cutout on the LCD case to let you pass a USB cable through into the bottom of the printer.
Comes with ALL the screws, LCD, Housing, and Cables needed to install the upgrade. Requires a firmware update that is included with this kit for the stock board. Technical support is included should you need assistance installing the LCD kit.
Description
What is this kit for and why should I get it?
This kit replaces the stock touch LCD to give you more control and features over YOUR printer. There is also a USB passthrough cutout on the LCD case to let you pass a USB cable through into the bottom of the printer. The stock LCD does not give you access to tuning settings like acceleration, jerk, steps per mm, and many others. This also allows for live Z adjustment (babystepping) and much more control over the core operations of your printer. PID tuning is available as well to fine-tune your hotend and bed temperature regulation. This goes great with our EZABL kit for automatic bed leveling.
Firmware Download
Requires a firmware update that is included with this kit for the stock board. Directions for the firmware are located here: Unified 2 Firmware – Ender 6. The Ender 6 has a bootloader already and updates with the SD slot by placing a firmware file on the card and turning the printer on. See the firmware page for full details on how to use and update the firmware.
Will this work with Klipper?
Yes, these LCDs and the stock board are supported by Klipper firmware. However, due to the complexity of Klipper, our technical support that is included does NOT apply if you are using Klipper firmware. Technical support only applies when you are using our Unified 2 Firmware package that is included.
Installation Directions & Video
Click here for the installation directions & video guide
Reviews (3)
3 reviews for Creality Ender 6 12864 LCD Conversion/Upgrade Kit
Add a review
Additional information
Ender 6 12864 LCD Housing - ABS
| Weight | 6 oz |
|---|---|
| Dimensions | 5 × 4 × 3 in |
| Made In | 🇺🇸 USA (with 🇺🇸 USA and 🌎 Global Materials) |
| Warranty Length | 6 Months |
Creality 12864 LCD Screen w/Cable
| Weight | 6 oz |
|---|---|
| Dimensions | 4 × 4 × 1 in |
| Made In | 🇨🇳 China w/QC in 🇺🇸 USA |
| Warranty Length | 6 Months |
Unified 2 Firmware for Ender 6
| Update Length | 3 Months |
|---|---|
| Firmware Package | Creality V4X Stock Printers |
| Made In | 🇺🇸 USA |
LCD Mounting/Housing Screws - 8 Pack
| Weight | 1 oz |
|---|---|
| Dimensions | 0.5 × 0.5 × 0.5 in |
| Made In | 🇨🇳 China |
| Warranty Length | SOLD AS-IS, NO WARRANTY |
Related products
Wim (verified owner) –
I like a switch and not a touch screen
Derek Macias (verified owner) –
Love how much easier this is than the touchscreen. Plus all the new settings available. I connect my printer to my Unraid server running an Octoprint docker. So I added a micro usb adapter I ordered from Amazon. https://www.amazon.com/dp/B015PG6VU6/ref=cm_sw_r_cp_apa_glt_fabc_B2QW68NSGTNDW2W883GR?_encoding=UTF8&psc=1
Had to shave the USB hole too and bottom 1 mm or 2 to get a nice snug fit. Could also add your usb power cutter but I had already snipped the pin on my USB cable.
Charles Taylor (verified owner) –
I love how these guys pay attention to the feedback they receive. The new case fits the screen perfectly!! I have much better control over my ender 6 with this upgrade. Make no mistake this is a definite worth while upgrade. If you do not want the best prints you can get then stick with the creality crap screen.