TH3D EZBoard Lite for Creality and Sovol Printers
From: $99.99
- The easiest and highest quality drop-in replacement for your Creality or Sovol Printer (see list of supported machines below)
- No parts to print, no physical modification of your printer control box needed to install the board.
- 32 Bit CPU for Fast Printing and all the latest Features
- Running the latest Marlin 2.0 firmware
- TH3D will continually keep the firmware up to date as new features are added to Marlin 2.0
- Simple configuration for the firmware just like our Unified Firmware U1 that everyone is familiar with
- SILENT Trinamic TMC 2208 Drivers in UART mode for Silent Printing
- Please read below for full details on our board BEFORE purchasing. If you have any questions please feel free to use our Live Chat or Contact Us.
- Some models need addons (Dual Z Board and/or Dual Cable LCD Adapter) listed on this page. They are detailed below.
Product Info
Don’t take our word for it. Check out the Video on this awesome board from Teaching Tech
Installation Materials & Firmware
- Manual and Firmware for Local Compiling is here: https://www.th3dstudio.com/knowledgebase/ezboard-installation-guide/
- Read the manual. It covers connections and explains what connectors do on our board.
- We also have an automated web tool to make your firmware in under 5 minutes with NO software needed on your computer. Check it out at https://EZFirmware.TH3DStudio.com.
- PLEASE NOTE: All EZBoards ship with a test firmware that is for testing the boards. You must flash firmware for the machine you are installing it in for the board to work.
Key Features
- 100% Drop-In Replacement Board
- NO Soldering
- NO Cutting wires to add new connectors
- Please Note: If you have tinned wires remove the ends and insert bare wire. Tinned wires over time will damage any screw terminals.
- CR-10(s) Machines will need to have the always on fan (control box fans -40mm and 50mm- and hotend fan) 2 pin connectors removed and connected to the FAN terminal on our board.
- NO Printing Adapter Parts
- 100% Working Firmware that is amazingly easy to use
- We use high quality and genuine parts, no cut corners here
- Works with Multiple Creality Models and Select Sovol Models
- CR-10 (Regular, Mini, S4 S5)
- Models with 2 Z Motors need the Dual Z Motor Adapter Addon
- CR-10S (Regular, Mini, S4 S5)
- Needs Creality Dual Cable LCD Adapter Board if you do not have the EXP3 header on your LCD.
- If you have the EXP3 header on your LCD use 1 cable to connect from the EXP3 to our board and you will then not need the dual adapter board.
- Models with 2 Z Motors need the Dual Z Motor Adapter Addon
- Does NOT work with Touch Screen Models
- Needs Creality Dual Cable LCD Adapter Board if you do not have the EXP3 header on your LCD.
- Ender 3
- Ender 3 Pro
- Ender 5
- Ender 5 Pro
- Sovol SV01
- Needs Dual Z Motor Adapter Addon
- CR-10 (Regular, Mini, S4 S5)
- Silent Trinamic TMC 2208 Stepper Drivers running at 1/256 Stepping
- UART enabled for driver configuration and data
- Change Modes with the LCD or GCode
- StealthChop2
- SpreadCycle
- Change Motor Current (VREF) from the LCD or Gcode
- SpreadCycle and StealthChop2 take 1/16 signals from the CPU and interpolates them to 1/256 for smooth motor control
- Why TMC2208 over TMC2209? Read here.
- 4 Layer PCB with 2oz Copper on EVERY layer for Durability and Heat Dissipation
- TMC 2208 Drivers Require a 4 Layer PCB and 2oz Copper
- Other boards use 2 layers and 1oz copper and will overheat over the lifespan of the product when using TMC2208s
- Some competitor boards advertise 2oz but that is only on the outer 2 layers. Our board is 2oz on every single layer.
- Why do you use the TMC 2208 Instead of TMC 2209 Drivers?
- Runs TH3D Unified Firmware 2.0
- Based on Marlin 2.0
- Easy Printer Setup like you know from our Unified Firmware
- GPL V3 Source Code Provided to EZBoard Customers
- All firmware features are 100% working and our board has EEPROM memory
- 32 Bit CPU for all the latest Marlin 2.0 features now and in the future
- No slowdowns when running all the latest Marlin Features
- No USB printing bottleneck like with 8 bit boards
- MOSFETs over specced for cool operation and long life
- Genuine Phoenix Contact Screw Terminals
- These terminals are very high quality and lock into place
- Terminals on other boards from China use no-name ones that are prone to failure over time
- Dual Controllable Fan outputs
- FAN 1 – Layer Fan Output – 0.5A Rated
- FAN 2 – Connect your Controller fan to shut off when not printing – 0.5A Rated
- Compatible with single and dual cable Creality LCDs
- Dual Cable Requires the Creality Dual Cable LCD Adapter board
- Other Connections On-Board
- Servo Header for BL Touch Use
- Filament Sensor Connection (works with EZOut sensors)
- The 5V pin headers are meant for use with a filament sensor and/or BL Touch. Do NOT connect a Raspberry Pi to these outputs as you will damage the board.
- Other Features
- Works with our EZABL Pro Kits
- Older EZABL kits like the V1/V2/V3/V3.1 typically work on the Z endstop or through the servo header connection
- If your ABL sensor is not reading triggered/open please see this article here on how to connect using the SERVO header with 2 jumper wires.
- Support Article: EZABL & EZBoard – Not Triggering Fix
- OPTIONAL Dual Z Motor Adapter cable for machines with 2x Z motors (select above)
- Bed output rated up to 13A. If your bed is aftermarket and pulls more than 13A then use the add on the MOSFET above. Board is fused at 15A.
- Works with our EZABL Pro Kits
Installation Video
Warranty & Support Information
Technical Support: TH3D Community Support
- To get technical support with this product it is handled through our TH3D Communities
- Forum: https://Forum.TH3DStudio.com/
- Discord: http://Discord.TH3DStudio.com/
- Facebook Group: https://www.facebook.com/groups/th3dstudio/
- Technical support is not included through the TH3D Helpdesk at no charge
- You are welcome to ask quick questions about a Community Support product through our helpdesk but in-depth 1 on 1 technical support is not included.
- If you require require a more personalized level of technical support it can be purchased separately in 1 hour blocks of time. Contact Us to get a time-slot paid for and scheduled through one of our technicians.
Warranty Info: 90 Days Warranty
- Our warranty covers any and all defects with the product.
- If your product fails or has problems within the warranty period you can contact our support team by emailing Support@TH3DStudio.com or by using the Contact Us link.
- This is for warranty related issues only, not technical support.
- Damage/Failure due to improper installation, usage, failure resulting from an issue with the machine the product is installed on, and/or modification or the product is not covered under warranty
0 reviews with a 4-star rating
There are no reviews with a 4-star rating yet