EZBoard – Flashing Firmware MicroSD Recommendations

Some larger MicroSD cards have been reported to not work correctly for flashing firmware on the EZBoard. If you are using a card 16GB or larger you will want to try a smaller card if the below recommendations do not work. Below are the recommended...

EZABL & EZBoard – Not Triggering Fix

It’s been reported that some EZABL kits (Mostly V3 but some EZABL Pro) are not registering triggering on some EZBoards (V1.0-V1.2). This is due to the Opto IC not pulling down the voltage enough to register that it is triggered. This was not ever found to happen...

EZBoard Installation Guide & Firmware Pack

Firmware Download RECOMMENDED FOR QUICKEST SETUP: If you want to try our web compiler head over to http://ezfirmware.th3dstudio.com Download Latest Firmware (U2.R1.14a) This firmware is ONLY for the EZBoard Series. Please use the Unified Firmware U1.R2 for all other...