PLEASE NOTE – We’ve found out that there are slight variations on the K1 MAX bed screw placements so the notches may be slightly off depending on the revision of the printer you have.
The plate will still work fine regardless of the bed screws as they can be unscrewed if they do not line up.
These are on deep discount for the notch alignment difference on the K1 MAX models – These are non-returnable as they are a clearance item.
Specifications
- 0.5mm Thick Plate + 0.2mm PEI Coating (per side) – THICKER plate for stronger hold on the bed
- DUAL sided black textured PEI coating
- Plates will NOT rust, New coating is stronger than other PEI plates and our older versions
- Rated up to 140C Bed Temperature
- This is for the PLATE ONLY. You still need a magnet and we carry them here: EZFlex² – Magnetic Base (140C Max Temp)
- Works with stock K1 MAX Magnet and SV06 Plus Magnet
Compatible Printers
- Creality K1 Max
- Sovol SV06 Plus*
*See picture below for Fitment on the SV06 Plus before purchasing. This covers the FULL PRINT AREA but not all of the physical bed as shown below.
Readme Before Using
- Clean the surface to ensure proper adhesion if not using an adhesive.
- Let plate cool to 40C or lower BEFORE flexing parts off it – Removing parts hot can damage the plate.
- Do NOT print PETG or TPU directly on the plate without some kind of adhesive between the plate and print as it can bond to the PEI. – Use something like our Bed Cement to print these materials without damaging the plate.
- Be sure to select the correct size. TH3D is not responsible if you order the wrong size for your printer bed
- Make sure to have a proper ZOffset when printing. Our warranty does not cover damage due to improper machine operation and/or calibration.
- Do NOT leave liquids on the magnet or place a plate on the magnet if it is not dry and clean.
Reviews
There are no reviews yet.