510x510mm Dual Sided Black Textured PEI Flex Plate – EZFlex Pro

Specifications

• 0.5mm Thick Plate + 0.2mm PEI Coating (per side) – THICKER plate for stronger hold on the bed
• DUAL sided black textured PEI coating
• Plates will NOT rust, New coating is stronger than other PEI plates and our older versions
• Rated up to 140C Bed Temperature
• This is for the PLATE ONLY. You still need a magnet and we carry them here: EZFlex² – Magnetic Base (140C Max Temp)
• Designed for use with our magnets. SOME stock magnets on low-end printers may NOT work due to them being far weaker than ours.

Compatible Printers

• Creality CR-10 S5
• Creality CR-10S S5
• Comgrow T500
• Cultivate3d the Beast V2
• Rat Rig V-Core 3 500

Readme Before Using

• Clean the surface to ensure proper adhesion if not using an adhesive.
• Let plate cool to 40C or lower BEFORE flexing parts off it – Removing parts hot can damage the plate.
• Do NOT print PETG or TPU directly on the plate without some kind of adhesive between the plate and print as it can bond to the PEI. – Use something like our Bed Cement to print these materials without damaging the plate.
• Be sure to select the correct size. TH3D is not responsible if you order the wrong size for your printer bed
• Make sure to have a proper ZOffset when printing. Our warranty does not cover damage due to improper machine operation and/or calibration.
• Do NOT leave liquids on the magnet or place a plate on the magnet if it is not dry and clean.