Upgrade your heated bed to heat quicker (if you have a stock MOSFET or none at all) with our high amp MOSFET board. You can use this with heated beds or hotends (if you are wanting maximum protection). This will handle up to 30A at 12V-24V. Compatible with PID regulation (used in our firmware). Works with any printer that runs on 12-24V on the board and heated bed. Make sure to set the voltage jumper to the printer voltage. Works on 12V or 24V.
- High Amp, Oversized FET for cool operation.
- Rated up to 30A @ 12V-24V DC, tested in house to run at up to 30A on 12-24V DC.
- Large Screw Terminals
- Includes 6″ Control Wire – Connection from MOSFET to Printer Board
- The control wire input (B-CTL header) is not polarity sensitive as there is a full-bridge rectifier onboard on this MOSFET board.
Installation, Wiring Diagram, & STLs for Mounting
Installation information, wiring diagram, and STL files to mount this to your printer (Universal and Creality Specific options are available) are all located in the Help Center here: TH3D High Amp 12V/24V MOSFET V2 Installation Information and Mounts – TH3D Studio LLC
This is a universal 3D printer part. That means it will work on almost any 3D printer (check your printer voltage and part voltage) with the correct mount for your specific machine. Thingiverse is a wonderful place to locate mounts and we also have printed parts in our shop for some universal parts.
It is up to you to determine and select a mount for your specific printer model (or design one) to install this part on your machine and wire it up to your machine (if applicable). You are welcome to Contact Us for recommendations for your particular printer model for mounting options that are available online if searching yourself does not yield any results.
3 Months Warranty - Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link.
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.