Meet the Owner
I’ve been passionate about tinkering, electronics, and computers since I was young. In 2016, I discovered 3D printing, and it quickly became more than just a hobby—it became my mission.
With over a decade of IT experience in support, project management, and systems administration, along with earning my Eagle Scout rank in 2007, I founded TH3D Studio to make 3D printing easier and more accessible. My goal is to help makers spend less time troubleshooting and more time printing.
Happy Printing!
~Tim Hoogland, Owner
Tim Hoogland
Owner & Founder
Things that are Important to Us
Our Dedicated, US Based Team
TH3D Studio is based out of Hobart, IN. All of our team members are in the US, we do not outsource any of our positions to people outside the US. When you call or email us you will get someone in the US who knows their stuff.
Honest Reviews
Unlike other people in the 3D printing space who rely on making sales through affiliate programs, we do not. We will always be honest when reviewing a 3D printer even if there are issues.
Many channels (especially ones that work with Bambu Labs) are bound by agreements where they cannot be honest with you on negative aspects of products. If they do, they get cut off from review units. We do not typically receive free printers anymore because companies want us to omit or lie about problems with products.
Focus on Quality and Service
Our focus is to get our customers the best products at fair prices. We’re all makers here, and we know how frustrating getting cheap parts from China is and not getting what you wanted the first time.
Everything we carry are parts and products that we use on our in-house machines to make our lives easier. There is enough to worry about in this hobby/industry so let us help simplify your 3D printing life by ensuring you get quality parts and excellent support.
When we design products, we take the time to run them through stress testing and analysis to make sure they work and last. Unlike many vendors in the 3D printing market, we do not use our customers to test our products, we sell products that work and are free of major design flaws.
Check out our Product Reviews
Used it to silence a CR10-S box, it did the job but was not easy to install.
First off, the UY IDC connectors are way to small to accommodate the fan...More
Used it to silence a CR10-S box, it did the job but was not easy to install.
First off, the UY IDC connectors are way to small to accommodate the fan wire gauge, there is no way to insert the wire to the end and if the wire is stripped, it does not hold inside. Second, the STL file for the spacer does not match the screw holders, the holes should be tampered on one side to help in positioning the spacer and the stock screws could be used. I tried to use 3x16 screws and they were too long so I went for 3x12 and it did the trick..
The noise coming out of the box is now divided by 2 which is good!!
First off, the UY IDC connectors are way to small to accommodate the fan wire gauge, there is no way to insert the wire to the end and if the wire is stripped, it does not hold inside. Second, the STL file for the spacer does not match the screw holders, the holes should be tampered on one side to help in positioning the spacer and the stock screws could be used. I tried to use 3x16 screws and they were too long so I went for 3x12 and it did the trick..
The noise coming out of the box is now divided by 2 which is good!!
Really nice 8mm Leadscrew Coupler work great and nice quality.
I figured I'd try swapping this PSU fan for the one on my Ender 3 after swapping the other two (hot end and controller). This is a definitely a much ...More
I figured I'd try swapping this PSU fan for the one on my Ender 3 after swapping the other two (hot end and controller). This is a definitely a much better quality fan than the one in the stock Ender 3 power supply. I'm not sure if it's any quieter than the stock fan, but it wasn't any louder... And it definitely seems to push a lot more air. I decided to try a fan shroud (off thingiverse) which seemed to help with noise levels (part of the motivation to replace them). I might have been concerned using it with the stock fan for airflow, but no worries with this one.
The only issue I had was with the Stock Ender 3 PSU and not the fan. When I pulled the stock fan connector the stupid glue pulled the whole connector off and I wasn't 100% of the orientation of it on the power supply board. I went by what they had printed on the circuit board (+/-) for the connector and put everything back together. The fan didn't work. It turned out it the print on the circuit board was wrong (Verified with my multimeter). I flipped the connector back around, powered it on, and everything was good. The fan works great and will probably outlast the rest of the power supply.
The only issue I had was with the Stock Ender 3 PSU and not the fan. When I pulled the stock fan connector the stupid glue pulled the whole connector off and I wasn't 100% of the orientation of it on the power supply board. I went by what they had printed on the circuit board (+/-) for the connector and put everything back together. The fan didn't work. It turned out it the print on the circuit board was wrong (Verified with my multimeter). I flipped the connector back around, powered it on, and everything was good. The fan works great and will probably outlast the rest of the power supply.
Fits great
I bought this since it was higher resolution and had a wider FOV that the logitech cameras I had. In addition the focus adjust built in prevents the ...More
I bought this since it was higher resolution and had a wider FOV that the logitech cameras I had. In addition the focus adjust built in prevents the need for modding. It works well, especially with my Ender 5 plus. I can get most of the bed in the cam at a relatively close distance. Price is reasonable to boot!
I real like this TH3D EZCam HD – 1080p camera.
This new EZCam replaces the older Logitech HD – 720p,
which became out of focus when the Y-axis trav...More
I real like this TH3D EZCam HD – 1080p camera.
This new EZCam replaces the older Logitech HD – 720p,
which became out of focus when the Y-axis traveled close to the Logitech camera.
I plugged EZCam into the USB connection of the Raspberry Pi 3B
and viewing the 1080p picture in my network EZPi and the focus was perfect
with in the full travel of my Y-axis.
Picture quality is better then I have ever seen it with the old Logitech cam.
I did not need to turn the silver ring to adjust the focus, it was perfect already.
It is a real good camera upgrade for my CR10 3D Printer.
I like it a lot !
This new EZCam replaces the older Logitech HD – 720p,
which became out of focus when the Y-axis traveled close to the Logitech camera.
I plugged EZCam into the USB connection of the Raspberry Pi 3B
and viewing the 1080p picture in my network EZPi and the focus was perfect
with in the full travel of my Y-axis.
Picture quality is better then I have ever seen it with the old Logitech cam.
I did not need to turn the silver ring to adjust the focus, it was perfect already.
It is a real good camera upgrade for my CR10 3D Printer.
I like it a lot !
Excellent product that is made well and provides extra peace of mind. Installed on a Maker Select V2, and is much recommended. Install guide is simple...More
Excellent product that is made well and provides extra peace of mind. Installed on a Maker Select V2, and is much recommended. Install guide is simple to follow and wiring is easy. 10 minute install.
Works great with the petsfang fan mount on the Ender 3 with the tough hotend. Quiet and high cfm. Great quality
Must have for anyone modding their printers or making parts that require assembly. Nice assortment of bolts/nuts
Works as advertised! Stops printer as soon as filament is out. Install is easy
Works as advertised and much better than the stock creality one!
Put this into my Ender 3 heater block and noticed an immediate improvement in how quickly my nozzle could get up to temp. Only using it for PLA right...More
Put this into my Ender 3 heater block and noticed an immediate improvement in how quickly my nozzle could get up to temp. Only using it for PLA right now and I still think it is worth the upgrade from stock for such a reasonable price.
