These are older LCD adapter boards for Ramps 1.4 boards included with some LCD orders from the factory, while needed to connect the LCDs to Ramps 1.4 boards, they have no use on any recent board like Creality, MKS, or BigTreeTech.
DISCLAIMER This firmware is being put out as a courtesy for people who want to use the EZBoard in their custom printer. Setup and usage of this firmware is *not* covered under the technical support included with the EZBoard. Using the EZBoard in a custom printer is an advanced setup for users who know what […]
Getting Started Welcome to the TH3D EZBoard V2 Documentation! Almost everything is plug-and-play. Make sure to unplug your printer from the wall before installing this or any other parts on your printer. We will cover the connections on the board and then go over adding things like filament sensors, EZABL, and BL Touch, all optional […]
It’s been reported that some EZABL kits (V1/V2/V3/V3.1) are not registering triggering on some EZBoards (V1.0-V1.2). This is due to the Opto IC not pulling down the voltage enough to register that it is triggered. This was not ever found to happen during testing so we have this workaround to fix the issue. We suspect […]