TH3D EZBoard Lite for Creality Printers

(19 customer reviews)

From: $99.99

  • Drop-in Replacement for your Creality Printer (see list of supported machines below)
    • No parts to print, no physical modification of your printer needed to install the board.
  • 32 Bit CPU for Fast Printing and all the latest Features
  • Running the latest Marlin 2.0 firmware
    • TH3D will continually keep the firmware up to date as new features are added to Marlin 2.0
    • Simple configuration for the firmware just like our Unified Firmware U1 that everyone is familiar with
  • SILENT Trinamic TMC 2208 Drivers in UART mode for Silent Printing

Add on Creality Dual Cable LCD Board? – optional

Required for CR-10S Machines that use 2x LCD Cables and do NOT have the EXP3 socket on them.

In stock

Add on a filament sensor (1.75mm)? – optional

Detects and pauses a print when your filament runs out so you can add more filament and continue printing. 1 meter cable included.

In stock

Need a high quality MiniUSB Cable (3FT)? – optional

In stock

Running an aftermarket DC bed? Add on a MOSFET (up to 25A). – optional

Available on backorder

Earn up to 151 Benchies.

In stock

Product Info

Key Features

  • 100% Drop-In Replacement Board
    • NO Soldering
    • NO Cutting Wires
      • Please Note: If you have tinned wires remove the ends and insert bare wire. Tinned wires over time will damage any screw terminals.
    • NO Printing Adapter Parts
  • Works with Multiple Creality Models
    • CR-10 (Regular, Mini, S4 S5)
    • CR-10S (Regular, Mini, S4 S5)
      • Needs Creality Dual Cable LCD Adapter Board if you do not have the EXP3 header on your LCD.
        • If you have the EXP3 header on your LCD use 1 cable to connect from the EXP3 to our board and you will then not need the dual adapter board.
      • Does NOT work with Touch Screen Models
    • Ender 3
    • Ender 3 Pro
    • Ender 5
  • Silent Trinamic TMC 2208 Stepper Drivers running at 1/256 Stepping
    • UART enabled for driver configuration and data
    • Change Modes with the LCD or GCode
      • StealthChop2
      • SpreadCycle
    • Change Motor Current (VREF) from the LCD or Gcode
    • SpreadCycle and StealthChop2 take 1/16 signals from the CPU and interpolates them to 1/256 for smooth motor control
  • 4 Layer PCB with 2oz Copper on EVERY layer for Durability and Heat Dissipation
    • TMC 2208 Drivers Require a 4 Layer PCB and 2oz Copper
    • Other boards use 2 layers and 1oz copper and will overheat over the lifespan of the product when using TMC2208s
    • Some competitor boards advertise 2oz but that is only on the outer 2 layers. Our board is 2oz on every single layer.
  • Runs TH3D Unified Firmware 2.0
    • Based on Marlin 2.0
    • Easy Printer Setup like you know from our Unified Firmware
    • GPL V3 Source Code Provided to EZBoard Customers
  • 32 Bit CPU for all the latest Marlin 2.0 features now and in the future
    • No slowdowns when running all the latest Marlin Features
    • No USB printing bottleneck like with 8 bit boards
  • MOSFETs over specced for cool operation and long life
    • Handles over 50A of Power per MOSFET
  • Dual Controllable Fan outputs
    • FAN 1 – Layer Fan Output – 0.5A Rated
    • FAN 2 – Connect your Controller fan to shut off when not printing – 0.5A Rated
  • Compatible with single and dual cable Creality LCDs
    • Dual Cable Requires the Creality Dual Cable LCD Adapter board
  • Other Connections On-Board
    • Servo Header for BL Touch Use
    • Filament Sensor Connection (works with EZOut sensors)
  • Other Features Included
    • Works with our EZABL Kits (all versions)
      • If your ABL sensor is not reading triggered/open please see this article here on how to connect using the SERVO header with 2 jumper wires that works.
    • Includes dual Z stepper adapter cable for machines with 2x Z motors
    • Bed output rated up to 13A. If you have more than that add on the MOSFET above.

Installation Materials & Firmware

Support/Warranty

  • Included Support: TH3D Community Support
  • Warranty: 90 Days
    • Warranty does not cover improper installation, wiring shorts, physical damage, or other electrical damage to the board.

Best Sellers

Share your thoughts!

5 out of 5 stars

19 reviews

Let us know what you think...

0 reviews with a 3-star rating

There are no reviews with a 3-star rating yet

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up