TH3D EZBoard Lite for Creality Printers
From: $99.99
- Drop-in Replacement for your Creality Printer (see list of supported machines below)
- No parts to print, no physical modification of your printer needed to install the board.
- 32 Bit CPU for Fast Printing and all the latest Features
- Running the latest Marlin 2.0 firmware
- TH3D will continually keep the firmware up to date as new features are added to Marlin 2.0
- Simple configuration for the firmware just like our Unified Firmware U1 that everyone is familiar with
- SILENT Trinamic TMC 2208 Drivers in UART mode for Silent Printing
Product Info
Key Features
- 100% Drop-In Replacement Board
- NO Soldering
- NO Cutting Wires
- Please Note: If you have tinned wires remove the ends and insert bare wire. Tinned wires over time will damage any screw terminals.
- NO Printing Adapter Parts
- Works with Multiple Creality Models
- CR-10 (Regular, Mini, S4 S5)
- CR-10S (Regular, Mini, S4 S5)
- Needs Creality Dual Cable LCD Adapter Board if you do not have the EXP3 header on your LCD.
- If you have the EXP3 header on your LCD use 1 cable to connect from the EXP3 to our board and you will then not need the dual adapter board.
- Does NOT work with Touch Screen Models
- Needs Creality Dual Cable LCD Adapter Board if you do not have the EXP3 header on your LCD.
- Ender 3
- Ender 3 Pro
- Ender 5
- Silent Trinamic TMC 2208 Stepper Drivers running at 1/256 Stepping
- UART enabled for driver configuration and data
- Change Modes with the LCD or GCode
- StealthChop2
- SpreadCycle
- Change Motor Current (VREF) from the LCD or Gcode
- SpreadCycle and StealthChop2 take 1/16 signals from the CPU and interpolates them to 1/256 for smooth motor control
- 4 Layer PCB with 2oz Copper on EVERY layer for Durability and Heat Dissipation
- TMC 2208 Drivers Require a 4 Layer PCB and 2oz Copper
- Other boards use 2 layers and 1oz copper and will overheat over the lifespan of the product when using TMC2208s
- Some competitor boards advertise 2oz but that is only on the outer 2 layers. Our board is 2oz on every single layer.
- Runs TH3D Unified Firmware 2.0
- Based on Marlin 2.0
- Easy Printer Setup like you know from our Unified Firmware
- GPL V3 Source Code Provided to EZBoard Customers
- 32 Bit CPU for all the latest Marlin 2.0 features now and in the future
- No slowdowns when running all the latest Marlin Features
- No USB printing bottleneck like with 8 bit boards
- MOSFETs over specced for cool operation and long life
- Handles over 50A of Power per MOSFET
- Dual Controllable Fan outputs
- FAN 1 – Layer Fan Output – 0.5A Rated
- FAN 2 – Connect your Controller fan to shut off when not printing – 0.5A Rated
- Compatible with single and dual cable Creality LCDs
- Dual Cable Requires the Creality Dual Cable LCD Adapter board
- Other Connections On-Board
- Servo Header for BL Touch Use
- Filament Sensor Connection (works with EZOut sensors)
- Other Features Included
- Works with our EZABL Kits (all versions)
- If your ABL sensor is not reading triggered/open please see this article here on how to connect using the SERVO header with 2 jumper wires that works.
- Support Article: EZABL & EZBoard- Not Triggering Fix
- If your ABL sensor is not reading triggered/open please see this article here on how to connect using the SERVO header with 2 jumper wires that works.
- Includes dual Z stepper adapter cable for machines with 2x Z motors
- Bed output rated up to 13A. If you have more than that add on the MOSFET above.
- Works with our EZABL Kits (all versions)
Installation Materials & Firmware
- Download Here: https://www.th3dstudio.com/knowledgebase/ezboard-installation-guide/
- We also have an automated web tool to make your firmware in under 5 minutes with NO software needed on your computer. Check it out at https://EZFirmware.TH3DStudio.com.
- PLEASE NOTE: All EZBoards ship with a test firmware that is for testing the boards. You must flash firmware for the machine you are installing it in for the board to work.
- Installation Video (Ender 3):
Support/Warranty
- Included Support: TH3D Community Support
- Upgrade to TH3D Standard Support available above
- Must have a working Windows or Mac PC to flash firmware.
- Warranty: 90 Days
- Warranty does not cover improper installation, wiring shorts, physical damage, or other electrical damage to the board.
bstewart74 (verified owner) –
Purchased this for my Creality CR10s and WOW. Amazing high-quality product. Literally painless plug and play coupled with fantastic guides. Using Atom to compile the firmware was a slight learning curve but this is yet another home run for TH3D.
(2) (0) Watch Unwatch
shadow703793 (verified owner) –
This board is certainly top quality. The soldering and components are very good, MOSFETs and stepper drivers run pretty cool (judged by using a IR thermometer, not quite as good as a thermal cam though). With TH3D now having their EZFirmware site (currently in Beta) it makes it super easy to customize and grab new firmware. I am currently using this on a modified Ender 3 Pro (EZABL Pro, Zesty Nimble, upgraded fans).
(2) (0) Watch Unwatch
Gavin T (verified owner) –
So I haven’t had it in my CR-10S for too long, but I’ll give my thoughts on messing around with it for a week. In short, it’s great! Nozzle temps are absolutely rock solid, I used to get temp fluctuations of +/- 3-5 degrees pretty much constantly, especially at higher temps(yes, I tried PID tuning, I suspect I had a bad board). The temps with this board are on target 99.99% of the time. No fluctuations at all, really impressed with that consistency.
The silent steppers are no joke either! I pushed it to close to 100mm/sec print speed just to see and still couldn’t hear anything over the control box fans. Throw your stepper dampeners away!
Would definitely recommend to anyone struggling with consistency issues with their Creality printer or wanting to quiet it down. Well worth the $$ and the couple month wait time
(1) (0) Watch Unwatch
bluecobras09 (verified owner) –
Relatively new 3D printer here and love new things and features. Found TH3D when watching 3D printer videos and was initially looking at the EZABL. When I saw the EZBoard was coming I held off and ordered the EZBoard and EZABL Pro together. What awesome products. I now no longer need to level my bed manually and the printer is so quiet. Also installed the solid bed mounts. Install was easy other than the fact I am getting up in age and my eyes are not the best and reading the small print is difficult. So the documentation and videos are very important to me. And the TH3D provided videos and documentation are excellent. My Ender 5 is a much better printer now.
(1) (0) Watch Unwatch
kirk.grames (verified owner) –
Fantastic, must have purchase for your Ender 3 / Pro. Installation was very simple. I used the online firmware compiler, downloaded the .bin file, cut/pasted it on to the SD card and done!. Now my printer is silent (also purchased all noctua fans). The best part is that my bed temps and bed leveling are so perfect that I no longer need to print rafts for large prints. Im getting NO curling on corners now printing on my glass bed! Very happy with my purchase. Ordered with Priority mail on Sunday, product shipped Monday and I had it by Wednesday. Its nice knowing that this is going to a small/U.S. based company. I have a feeling that TH3D wont be small for long. I definitely recommend.
(1) (0) Watch Unwatch
peters.matt73 (verified owner) –
I have an Ender 3 and was really wanting it to be quieter as I print a lot at night an didn’t like the stock sound of the Ender 3. I’m super impressed with the TMC 2208 drivers and how quiet my stepper motors are. The quality of the TH3D EZBoard is great too, I wanted to purchase a quality board not a cheap pile of junk. It took longer to get the hot glue off the stock board then to plug everything into the new EZBoard. I have a EZOut filament sensor, an EZABL PRO bed leveling sensor and the Dual Z upgrade. I’m happy with all my TH3D upgrades! The steps to compile TH3D Unified Firmware Package with Marlin 2.0 were simple for me but I have previous code experience and I was able to compile the new FW in about 2.5 mins on my PC.
I would defiantly recommend to anyone considering this product.
(1) (0) Watch Unwatch
WFOrider (verified owner) –
Purchased this for my Creality CR10s and OMG Amazing high-quality product. 100% Drop-In Replacement Board 32 Bit CPU for fast printing and all the latest features running the latest Marlin 2.0 firmware Silent Trinamic TMC 2208 stepper drivers running at 1/256 stepping works as advertised great value will be my go to board for all supported Creality printers. Thanks for all you do for the community!
(1) (0) Watch Unwatch
Anson (verified owner) –
Literally took me 15 minutes to install on my CR-10 S5. The online Marlin 2.0 configuration was also a complete breeze and firmware was installed at first boot up. Performance of my printer has noticeably improved and adjust vref without a meter is an absolute pleasure .
Great deal, fast postage and a top quality board.
(1) (0) Watch Unwatch
Johnathen Hopkins (verified owner) –
Put this in my new ender 3 pro and this board is amazing I can’t believe how silent it is now. The build quality is the best. Plan on upgrading all my printers to this board.
(2) (0) Watch Unwatch
login721 (verified owner) –
it’s hard to believe how the board improves the print quality. It very silent too, I’m gonna miss the motor noise.
(1) (0) Watch Unwatch
deleonc (verified owner) –
Installed on my Cr-10 wow is this thing quiet now. direct replacement and easy to load firmware. will purchase another one for the ender3pro
(2) (0) Watch Unwatch
Curtis Brooks (verified owner) –
I am glad I purchased two boards from the first batch. Installed one in my CR10 converted to a CR10S and it is running great. The loudest part of the machine is the 5015 part fan I installed. Movement is smooth, and print quality is top-notch. Definitely recommend to others.
(2) (0) Watch Unwatch
Peter Lunn (verified owner) –
Purchase for my Ender 3 Pro.
Very easy hardware install as per the video’s, a few issues getting the firmware built (not TH3D issues but Atom). Got it working with my BLTouch easily (after looking at BLTouch/Marlin 2.0 guides on YouTube, re-wiring the BLTouch connector and a little soldering as the wires pulled out of the connectors on the BLTouch, not the best quality, might look at changing to EZabl in future). I’ve seen a good step up in print quality and down in noise. Connected straight o my existing Octoprint no issues. I’ve mostly been printing PETG on my heavily upgraded printer (my own designed linear rails on Y and working on Z axis upgrade). Not solved my slight vertical lines but it confirmed its either a stepper/hardware issue. So far very, very happy with the purchase, would recommend to anyone looking for an upgrade board, not just for the noise reduction.
(1) (0) Watch Unwatch
Charles Guerin –
Loved the firmware install from SD Card! Great time-saver. Install went pretty well though my OEM APR probe (similar to the EZABL) wouldn’t work with the new board, probably an issue with pull-up or pull- down resistors on the z-end stop input. So… I ordered an EZABL, and stuck the old Z end stop on in the meantime.
Print quality is very good now, machine is basically silent as promised…now how can we get the fans silent? :-))
If I could recommend something — make an instruction list for the CR-10 or CR-10S because it took me awhile to figure out the fan configuration. Not sure why it uses a screw connection for always on fans instead of a 12 volt pin? (which would have been plug and play)
(3) (0) Watch Unwatch
CRUISER DON RUSSELL (verified owner) –
AS SOON AS I SAW THE LIVE STREEM ABOUT THIS PRODUCT, I DECIDED THAT I HAD TO HAVE IT. I NOW HAVE IT INSTALLED AND FULLY USTILIZED AND ENJOYED THE SUPPORT, VIDEO’S, ETC.. I DID HAVE SOME ISSUES WITH THE SOFTWARE BUT I GOT THAT SORTED OUT. THEN THE REAL PROBLEM AROSE, I ASSUMED THAT MY Z STEPPER WAS GOOD AND IT SENT ME CHASING MY TAIL FOR A WHILE, BUT, PLUGGING Z INTO Y SOCKET AND THE Y INTO THE Z SOCKET TOLD ME THE STORY.
I AM VERY PLEASED WITH THIS INSTALL AND VERY IMPRESSED WITH WHAT I KNOW OF IT AT THIS TIME. I REALLY LIKE THE EASE OF UPDATING USING “ATOM”. THIS WAS A LEARNING EXPERIENCE WELL WORTH WHILE.
JUST DO IT !
(2) (0) Watch Unwatch
Jameson Jendreas (verified owner) –
Installed on my CR-10 S. Fairly painless install. Only thing that wasn’t straight plug-and-play are the case fans, but still easy to install. Renders the printer nearly silent. I had issues with building firmware in Atom and ended up using Visual Studio Code instead (as I use VSC already). Works great with my EZALB. Highly recommend.
(0) (0) Watch Unwatch
Steve Schowiak (verified owner) –
This board is a must! Motors are whisper quiet, print quality is much better.
(0) (0) Watch Unwatch
visser_chris (verified owner) –
Holy Freaking Cow!!!!! Just installed my EZLITE board. Dead easy swap and straight up flash the firmware for my stock CR-10 with EZABLPRO from the BIN file provided. At first I thought i’d not connected the z axis as the was not a whisper when I was raising the gantry… then noticed it’s moving.
This is AMAZINGLY silent!!!! You could sleep in the same room with this thing going and the only thing bugging you would be the fans in the control box.
Fantastic product Tim and a big thanks to all of you at TH3D for the superb quality of your products…. all the way from Australia 🙂
(2) (0) Watch Unwatch
woodwaker_dave (verified owner) –
I just received my second EZBOARD, and installed it with the EZABL and solid bed mounts on my ENDER 5 Th second one was very easy, since I went through the learning process on the first ENDER 5. Took about 2 hours from start to finish and am printing CHEP calibration cube. This is a great product, does what is is supposed to do and just works. I am working on redoing the cabling on the ENDER 5, to get some kind of wire management. I moved the control box and display to the back and have sleeved all of the cables.
(1) (0) Watch Unwatch