TH3D EZBoard V2 – For Creality/Sovol Printers – Unified 2, Marlin, & Klipper
From: $94.99
Genuine STM32 F4 CPU @ 168mhz, Trinamic 2209 Drivers, EZFirmware Compatible, Tech Support Included, Hotend & Bed Thermistor VIN Short Protection, Running TH3D Unified 2.0 Firmware
High-Quality, Packed with Features, Easy to Use, & Technical Support
Our EZBoard V2 is the latest board from us at TH3D Studio. This board is a drop-in replacement for many printer models from Creality and Sovol. To verify compatibility see the Supported Printer list below.
If you are looking for a high-quality, reliable board that doesn’t require you to know programming to use, then this is the board for you.
Unmatched Support – In addition to being physically made well, we also provide 1 on 1 technical support through our TH3D Help Desk and TH3D Live Chat.
Lifetime Firmware Updates – Our EZBoard builds in our Unified 2 Firmware suite will remain 100% free for all EZBoard customers.
Painless Firmware Updates – We also have an exclusive firmware website, called EZFirmware, that allows you to compile firmware without ever touching VSCode or complicated programming options.
Build Quality – We use only high-quality and original parts on our boards and our PCB is 4 layers with 2oz copper on every layer. Our screw terminals are from Phoenix Contact. The other components on our boards are name-brand with tight tolerances. This means your EZBoard will last for years to come and give you a reliable board for your printer.
Genuine ST CPU + EEPROM – Our EZBoard is powered by a Genuine ST Micro F4 series CPU running at 168mhz with a whopping 1MB of flash memory. We also have a dedicated 4K EEPROM chip for your EEPROM settings. Unlike other companies who are swapping CPUs to lesser brands we guarantee that our boards come with a real STM32 CPU and not a clone.
Trinamic Drivers – The drivers are Trinamic TMC2209 drivers that provide up to 2A per motor of continuous current and are fully configurable from the firmware thanks to the UART connection between the drivers and CPU. Need to change motor current or mode? You can do it right from the LCD or Gcode.
Tested in-house, Not on Customers
The EZBoard V2 has been in development for almost a year now and we’ve racked up over 1000 hours of print time on them before ever selling a single one. We’ve performed extensive testing on these boards to make sure thermals are good and there are no electrical issues. You have our word and promise that we will not sell you a board that is not done.
Many vendors that sell cheap boards in the 3D printing market have a history of selling boards that have major issues and/or are not even 100% working when they are sold. Here at TH3D, we believe in selling products that are 100% working and not using our customers as guinea pigs to test things out.
Compatible with Multiple Firmwares
Our board runs our popular Unified 2 as well as other 3rd party firmware like Marlin 2 and Klipper.
Supported Printers
CR-10 (Regular, Mini, S4 S5)
CR-10S (Regular, Mini, S4 S5) – Usually needs Creality Dual Cable LCD Adapter (addon above)
If your CR-10S LCD has an EXP3 plug on it then you do NOT need the Dual Cable LCD adapter.
Does NOT work with Touch Screen Models
CR-10 V2 and CR-10 V3 are not supported due to mounting differences with the stock board
CR-20 – Needs CR-20 specific Dual Cable LCD Adapter (addon above)
Ender 2
Ender 2 Pro – Requires cable adapter kit
Ender 3/3 Pro
Ender 3 V2 – Needs LCD swapped.
See here for details: Ender 3 V2 – Swapping to the 12864 Creality LCD for more features – TH3D Studio LLC
Ender 3 MAX
Both layer fans will need to be spliced to use one connector as our board has one header for the layer fan.
Ender 5/5 Pro
Ender 5 Plus – Needs other addons/upgrades listed below
Needs the 12864 LCD Conversion Kit and the Creality Dual Cable LCD adapter (addon above)
Does NOT work with the stock Touch Screen, only with the 12864 LCD Conversion linked above
Ender 6
Needs the 12864 LCD Conversion Kit
Does NOT work with the stock Touch Screen, only with the 12864 LCD Conversion linked above. NOTE the SD slot is on this board so the stock extension will not work. You can use a SD Extension to extend it and replace the stock SD extension. This SD extension works with the Ender 6 SD Extension Adapter Plate that we made.
Sovol SV01
Sovol SV01 Pro
Requires 12864 LCD Conversion Kit
Does NOT work with the stock Touch Screen, only with the 12864 LCD Conversion linked above
Sovol SV03
Sovol SV06 – Requires extra wiring for the stock ABL sensor.
You can re-wire and modify the stock ABL 5 pin plug or use jumper wires to make the connection. See here for details and pictures: https://support.th3dstudio.com/helpcenter/ezboard-v2-sovol-sv06-stock-abl-sensor-wiring/
Note that this is only required for the stock ABL sensor. If you are also converting to our EZABL kit then you will not need to use the stock ABL sensor plug.
Technical Specifications
CPU – STM32F405RGT6 – 168mhz, 32-Bit, 1MB Flash, 192K RAM
Official Firmware – TH3D Unified 2 (Based on Marlin 2)
3rd Party Firmware Support** – Marlin 2.X+, Klipper
Voltage Compatibility – 12-24V DC Input
PCB – 4 Layers, 2oz Copper every layer
Stepper Drivers – 4x Trinamic TMC2209 in UART Mode – 2A RMS, 2.8A Peak Output, Sensorless homing capable
Hotend Output – Up to 8A Max Load*
Heated Bed Output – Up to 13A Max Load*
2x Fan Outputs – Up to 2A Max Load*
Filament Sensor Port – Works with our EZOut sensor and OEM Creality/Sovol sensors
NeoPixel Port – Onboard port for powering up to 2A of 5V NeoPixels directly from the board
BL Touch Port – BL Touch (SERVO) header Onboard
5V Rail Isolation – Prevents backfeeding USB power to the PSU input terminal
Other Details & Features
- Onboard 4K EEPROM Chip
- Onboard Dual Z Motor Output headers (parallel)
- Hotend Thermistor VIN short protection
- Bed Thermistor VIN short protection
- Flyback Diodes on all MOSFETS
- Serial Header Onboard
*The EZBoard V2 comes with a 15A main fuse. Exceeding 15A total draw will blow the fuse. Up to 20A fuse can be used for higher load machines.
**Please note that our included technical support is limited to our Unified 2 Firmware as Klipper and Marlin are for advanced setups for advanced users. We do have technical support available at an additional charge for advanced setups or applications that fall outside of the standard product support scope.
Manuals and Firmware
| Made In | 🇨🇳 China |
|---|
4GB MicroSD Card - (Recommended)
| Weight | 0.2 oz |
|---|---|
| Dimensions | 1 × 1 × 0.2 in |
| Made In | 🇨🇳 China |
High-quality MiniUSB Cable 3FT (Recommended)
| Weight | 1 oz |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Made In | 🇨🇳 China |
Add on our EZNeo 220 Strip?
| Weight | 4 oz |
|---|---|
| Dimensions | 9 × 2 × 1 in |
Add on Creality Dual Cable LCD Board?
| Weight | 0.2 oz |
|---|---|
| Dimensions | 0.2 × 0.2 × 0.2 in |
| Version | Standard (V2), CR-20 (V2) |
| Made In | 🇨🇳 China |
Add on a filament sensor (1.75mm)?
| Weight | 1 oz |
|---|---|
| Dimensions | 2 × 2 × 1 in |
| Made In | 🇨🇳 China |
Running an aftermarket DC bed?
| Weight | 2 oz |
|---|---|
| Dimensions | 4 × 4 × 4 in |
| Made In | 🇨🇳 China |
Q & A
This will replace the stock board and it supports the BLTouch. While you can compile your own firmware one of the big benefits of our board is our website that compiles it for you. You can actually check out the website before purchase by going to https://ezfirmware.th3dstudio.com. You'll also get technical support from our US support team if you need help. :)
You would need to contact Creality for support on their Sonic Pad. Their device runs a bastardized version of Klipper that is not compatible with mainline Klipper so it limits you on what you can do with it. Our EZBoard does work with Klipper but we do not do anything support wise with the Sonic Pad as its a horrible product. Also, just a FYI - the Sonic Pad is running code stolen from the community and should not be purchased. If you want to use a Klipper type pad you should get something like the BTT PAD7 as they support open source unlike Crealitys.
If you want to use the LCD on your printer you're going to want to swap out the color LCD for the 12864. We have a kit for that here: https://www.th3dstudio.com/product/creality-ender-3-v2-12864-lcd-conversion-upgrade-kit/
The X1 mounting hole pattern is slightly off from this board. We do have one in our X1 here at the shop. We just modified the stock printer enclosure (had to remove one standoff with a dremel) and then flashed it as an Ender 3 model.
No. Our EZBoards include updates for free, for the life of the product.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related products
All of my compatible printers are immediately upgraded to TH3D’s boards. I also install these in friend’s machines. I have bought several of these and TH3D’s Unified firmware with tutorials makes this very easy. Add EZABL and a flex PEI sheet from TH3D and you turn a mundane printer into a reliable superstar! TH3D’s support and quality easily justifies the investment.
The board is a fantastic replacement. It is a 100% form match for the screw holes, usb, and microsd card.
Really like these boards. They are solid. You can feel the weight of the board when you get it in your hand. Setup was a breeze and the support guys were super helpful with any questions I had.
I got this board to replace my Creality 4.2.2 board since I wanted something that worked more flawlessly with my other upgrades. This board is awesome! EZNeo lights work perfectly. EZABL is great (though I had to use it on the servio pins instead of the Z-endstop pins). EZOut worked great. And my favorite part is the EZFirmware site! No more VS Code installing and ZIP files to deal with. It’s all done in a web browser which is super cool!
It’s boringly reliable, and is exactly what I needed.
Great board, fast, and super reliable. You may be paying more than other brands, but that’s because you are getting quality hardware, components, design, and actual customer service here in the states.
Unfortunately, I have a lot of experience with those junk SKR boards out of China. Right now, I’m sitting at a 50% failure rate on them. When my brand new Ender 5 Plus just wasn’t playing nice, I decided to ditch the Creality board and try one of these.
While I LOVE dinking around in Marlin, I need my printer up and running ASAP. I installed the board, installed the firmware and VIOLA! I was printing high quality parts. I dialed in the steps and now it’s all spot-on! Thanks TH3D!