At its core, the MultiMount is an aluminum base that attaches to the existing screw standoffs on the hot-end carriage of printers such as the Ender 3, Ender 5, and CR-10, among others. It provides a rigid clamping system that is compatible with any V6-style or V6-compatible groove mount, keeping your chosen hot-end securely in place.
The MultiMount and all its addon parts are 100% designed and made in the USA, no cheap Chinese-made parts here unlike other sellers. The MultiMount’s compatibility with groove-mount hot-ends opens up a vast array of build possibilities for Creality users.
Have your eye on our Tough All-Metal Hot-end? Mounting it has never been easier! Simply clamp it in place. Drooling over a Slice Engineering Mosquito (requires the groove mount adapter from Slice)? The MultiMount can do that. How about a Phaetus Dragonfly BMO for a shiny aesthetic? The MultiMount can fit these hot-ends and more!
The MultiMount is also a truly modular system for attaching accessories such as fans, bed-leveling sensors, and more! Our team has been hard at work designing and testing accessories based on common builds and customer requests. It has mounting positions for accessories on the left, right, and top sides which allow for a vast array of different hot-end builds.
Note:ย The MultiMount System is compatible with stock Creality carriages for the printers listed in our compatibility list. May not be compatible with aftermarket carriages.
The MultiMount System has a modular design, allowing for a wide variety of printed accessories. There are mounting positions on the left and right side for accessories such as fan ducts and ABL mounts. There are also two screw positions on the top face for use with direct-drive adapters, strain-relief/cable management parts, and more.
Where is the MultiMount System made?
The entire MultiMount ecosystem is Made in the USA! The MultiMount base and clamp are hand-machined from aluminum and anodized locally, and our accessories are printed in-house out of ABS filament.
Kit Contents
What comes with the MultiMount System kit?
- (qty 1) MultiMount Base and Clamp, anodized in blue with logo
- (qty 2) M3ร6 mm Flanged Button Head Screws (Attaches MultiMount base to printer carriage)
- (qty 2) M3ร12 mm Flat Head Screws (for the strain relief + clamp printable accessory)
- (qty 2) M3ร16 mm Flat Head Screws (Attaches MultiMount clamp to base, holding the hot-end in place)
- (qty 4) M3ร10 mm Button Head Screws (Attaches accessories to all four provided accessory locations, one on each side and two on top of the MultiMount base)
- (qty 2) M3ร22 mm Button Head Screws (for attaching 50mmx15mm blower fan to printable accessories)
- (qty 4) M3 mm Hex Nuts (for strain relief + clamp and fan attachment)
The MultiMount System also includes access to our STL package, which includes STL files for all of the accessories we’ve designed, such as fan ducts, sensor mounts, direct-drive adapters, and more!
Additionally, we have a select set of accessories available to purchase along with your MultiMount kit. Pick-and-choose your accessories and we’ll print them for you!
Printer Compatibility List
TH3D Tested:
The MultiMount System base and clamp have been tested by our staff to work with several standard Creality carriages, including:
- CR-10/CR-10S models (CR-10, Mini, S4, S5 with standard Creality X carriages)
- Ender 3, Ender 3 Pro, Ender 3 V2
- Ender 5, Ender 5 Pro, Ender 5 Plus (accessories specific to these models are available)
Requires Additional Components:
The following printers will require additional components to use the MultiMount System:
- Ender 2 Pro (Requires printed adapter plate, contact us for details)
- Ender 6 (Requires printed adapter plate, contact us for details)
This product is NOT compatible with the following:
These are printers or items we know are NOT compatible with this product:
- Micro Swiss direct-drive brackets for Creality printers (several reasons, including alignment of the extruder vs. hot-end, design of the standoffs for the hot-end, etc.)
Printer not listed here?
The MultiMount System is considered a “universal” part that should fit most printers that use Creality’s hot-end screw positions. The MultiMount base and clamp may also be compatible with non-Creality printers. If your printer is not listed here, that means we have not tested it in-house and cannot guarantee compatibility.
If you are unsure if it is compatible with your printer, please contact us for assistance.
Hot-end Compatibility List
TH3D Tested:
The following hot-ends have been tested in-house to work with the MultiMount System:
- TH3D Tough All-Metal Hot-End
- E3D V6 and Volcano hot-ends
- E3D Revo 6
- Phaetus Dragonfly BMO (V6-compatible collar mount version)
- Creality Spider (using included V6-compatible collar mount)
- Slice Engineering Mosquito and Mosquito Magnum w/the Groovemount Adapter
Hot-end not listed here?
The MultiMount System is designed to work with any V6-compatible collar/groove mount. There may be hot-ends with collar/groove mounts that do not work with the Multi Mount due to variables such as heatsink size or shape, non-standard collar size or shape, manufacturing or product differences, etc.
If your hot-end is not listed here, that means we have not tested or verified fitment and cannot guarantee compatibility. If you have questions or concerns about compatibility, please contact us for assistance.
Top Addon Accessory Types and Descriptions
Strain Relief and Clamp – This is a two-part strain relief/cable guide that attaches to the top mounting points of the MultiMount System. This includes the strain relief base and a clamp to hold the cables and PTFE tubing in place.
- Requires 2x M3x10mm screws to attach the strain relief base to the MultiMount base.
- Also requires 2x M3x12mm screws and 2x M3 hex nuts to attach the strain relief clamp to the strain relief base.
Direct Drive Mount – Tough Extruder V2 – This bracket is used to convert a Bowden setup into Direct Drive based on our Tough Extruder V2. Also works with Bondtech BMG and clones.
- Requires 2x M3x10mm screws to attach the Direct Drive Mount to the top of the MultiMount base.
- Also requires the screws from the Tough Extruder V2 to hold the extruder and motor to the Direct Drive Mount.
- This setup will also require a length of PTFE tubing to run between the hot-end and the Tough Extruder V2. Please see our installation instructions for more details.
- We highly recommend using a pancake stepper motor with our Direct Drive mount, as it both saves weight and avoids collisions with the frame on CR-10/Ender 3 style machines.
40mm Heatsink Fan Mount, Generic version – This bracket can be used to attach a 40mm fan to the MultiMount System for the purpose of heatsink cooling. The generic version of this mount sits directly in front of the hot-end’s heatsink and does not have any additional ducting, making it perfect for use with most hot-ends on the market.
- Requires 2x M3x10mm screws to attach the Heatsink Fan Mount to the MultiMount base.
- Also requires additional screwsย to attach the fan to the Heatsink Fan Mount. In most cases, these screws can be repurposed from the existing fan shroud.
Left Side Accessory Types and Descriptions
Mount Types:
*ENDER 5/ENDER5 PLUS FITMENT WARNING:
Due to physical machine constraints the EZABL and EZABL+5015 mounts do not work on the left or right side for these models. There are specific LEFT mounted versions available just for the Ender 5 and Ender 5 Plus.
5015 Fan Duct – Used to mount a 5015 blower fan to the left-hand side of our MultiMount System. Simple, yet effective.
- Requires 1x. M3x10mm screw to attach the fan duct to the MultiMount.
- Also requires 1x M3x22mm and 1x M3 hex nut to attach the 5015 blower fan to the duct.
EZABL Mount (18mm) – Used to mount any of our EZABL Proโข sensors to the left-hand side of the MultiMount System. Designed for 18mm sensors, our smaller Mini and Micro EZABL sensors will require the use of their included adapter rings.
- Requires 1x M3x10mm screw to attach the EZABL mount to the MultiMount.
- Nozzle-to-Probe Offsets:
- Left-mounted: [ -40, 5 ]
Combination 5015 fan + EZABL Mount โ Why settle for one when you could have both? This is a one-piece mount with spots for both a 5015 blower fan and our EZABL Proโข sensors.
- Requires 1x M3x10mm screw to attach the 5015 + EZABL mount to the MultiMount.
- Also requires 1x M3x22mm screw and 1x M3 hex nut to attach the 5015 blower fan to the duct.
- Nozzle-to-Probe Offsets:
- Left-mounted: [ -57, -4 ]
Ender 5/5 Plus EZABL Mount (18mm) – Used to mount any of our EZABL Proโข sensors to the left-hand side of the MultiMount System. Designed for 18mm sensors, our smaller Mini and Micro EZABL sensors will require the use of their included adapter rings.
- Requires 1x M3x10mm screw to attach the EZABL mount to the MultiMount.
- Nozzle-to-Probe Offsets:
- Left-mounted: [ -33, -9 ]
Ender 5/5 Plus Combination 5015 fan + EZABL Mount โ Why settle for one when you could have both? This is a one-piece mount with spots for both a 5015 blower fan and our EZABL Proโข sensors.
- Requires 1x M3x10mm screw to attach the 5015 + EZABL mount to the MultiMount.
- Also requires 1x M3x22mm screw and 1x M3 hex nut to attach the 5015 blower fan to the duct.
- Nozzle-to-Probe Offsets:
- Left-mounted: [ -56, -9 ]
“Sneaky” EZABL Micro + 5015 Fan Mount – Designed to hide one of our EZABL Micro (8mm) sensors in a compact, out-of-the-way spot between the fan and the hot-end assembly. Great for keeping your hot-end’s footprint as small as possible!
- Requires 1x M3x10mm screw to attach the “Sneaky” mount to the MultiMount.
- Also requires 1x M3x22mm screw and 1x M3 hex nut to attach the 5015 blower fan to the duct.
- Nozzle-to-Probe Offsets:
- Left-mounted: [ -20, -17 ]
BLTouch Mount – Used to mount a BLTouch or CRTouch to the left-hand side of the MultiMount System.
- Requires 1x M3x10mm screw to attach the BLTouch/CRTouch mount to the MultiMount.
- Also requires the screws provided with the BLTouch/CRTouch to attach the device to the mount.
- Nozzle-to-Probe Offsets:
- Left-mounted: [ -27, -9 ]
Right Side Accessory Types and Descriptions
Mount Types:
*ENDER 5/ENDER5 PLUS FITMENT WARNING:
Due to physical machine constraints the EZABL and EZABL+5015 mounts do not work on the left or right side for these models. There are specific LEFT mounted versions available just for the Ender 5 and Ender 5 Plus.
5015 Fan Duct – Used to mount a 5015 blower fan to the left-hand side of our MultiMount System. Simple, yet effective.
- Requires 1x. M3x10mm screw to attach the fan duct to the MultiMount.
- Also requires 1x M3x22mm and 1x M3 hex nut to attach the 5015 blower fan to the duct.
*EZABL Mount (18mm) – Used to mount any of our EZABL Proโข sensors to the left-hand side of the MultiMount System. Designed for 18mm sensors, our smaller Mini and Micro EZABL sensors will require the use of their included adapter rings.
- Requires 1x M3x10mm screw to attach the EZABL mount to the MultiMount.
- Nozzle-to-Probe Offsets:
- Right-mounted: [ 40, 5 ]
*Combination 5015 fan + EZABL Mount โ Why settle for one when you could have both? This is a one-piece mount with spots for both a 5015 blower fan and our EZABL Proโข sensors.
- Requires 1x M3x10mm screw to attach the 5015 + EZABL mount to the MultiMount.
- Also requires 1x M3x22mm screw and 1x M3 hex nut to attach the 5015 blower fan to the duct.
- Nozzle-to-Probe Offsets:
- Right-mounted: [ 57, -4 ]
“Sneaky” EZABL Micro + 5015 Fan Mount – Designed to hide one of our EZABL Micro (8mm) sensors in a compact, out-of-the-way spot between the fan and the hot-end assembly. Great for keeping your hot-end’s footprint as small as possible!
- Requires 1x M3x10mm screw to attach the “Sneaky” mount to the MultiMount.
- Also requires 1x M3x22mm screw and 1x M3 hex nut to attach the 5015 blower fan to the duct.
- Nozzle-to-Probe Offsets:
- Right-mounted: [ 20, -17 ]
BLTouch Mount – Used to mount a BLTouch or CRTouch to the left-hand side of the MultiMount System.
- Requires 1x M3x10mm screw to attach the BLTouch/CRTouch mount to the MultiMount.
- Also requires the screws provided with the BLTouch/CRTouch to attach the device to the mount.
- Nozzle-to-Probe Offsets:
- Right-mounted: [ 27, -9 ]
Adapter Plate Types and Descriptions
Ender 2 Pro – This allows you to mount the MultiMount to the Ender 2 Pro X carriage. Includes required M3x12mm bolts.
Ender 6 – This allows you to mount the MultiMount to the Ender 6 X carriage. Includes required 2x M3x12mm bolts.
Sovol SV01/SV03ย – This allows you to mount the MultiMount to the SV01/SV03 X carriage. Includes required 2x M3x12mm bolts and 2x M3 Nuts that install in the rear of the adapter plate.
Installation Guides and Documentation
MultiMount System Installation Guide
MultiMount Accessories Installation Guide
Additional Information and FAQs
Manufacturing Details – 100% made in the USA! Our MultiMount accessories are designed and printed in-house by TH3D! We use Black ABS for our printed parts.
STL Files – Our full STL Package is included with the purchase of the MultiMount System kit and our Accessories Pack bundles. The STL Package is also available for standalone purchase.
I bought the original version from the creator and now that th3d has taken over its even better! The dual fan set up with abl is next level
Very modular and easy to set up and use. Definitely recommend if you’re looking for a way to mount a V6 style hot end.
Quality parts and comes with everything you need to get going. Honestly an absolute must upgrade over most stock setups. Pairs up great with the Tough Extruder and Tough Hotend.