From: $99.99
Genuine STM32 F4 CPU @ 168mhz, Trinamic 2209 Drivers, EZFirmware Compatible, Tech Support Included, Hotend & Bed Thermistor VIN Short Protection, Running TH3D Unified 2.0 Firmware
Our EZBoard V2 is the latest board from us at TH3D Studio. This board is a drop-in replacement for many printer models from Creality and Sovol. To verify compatibility see the Supported Printer list below.
If you are looking for a high-quality, reliable board that doesn’t require you to know programming to use, then this is the board for you.
Unmatched Support – In addition to being physically made well, we also provide 1 on 1 technical support through our TH3D Help Desk and TH3D Live Chat.
Painless Firmware Updates – We also have an exclusive firmware website, called EZFirmware, that allows you to compile firmware without ever touching VSCode or complicated programming options.
Build Quality – We use only high-quality and original parts on our boards and our PCB is 4 layers with 2oz copper on every layer. Our screw terminals are from Phoenix Contact. The other components on our boards are name-brand with tight tolerances. This means your EZBoard will last for years to come and give you a reliable board for your printer.
Genuine ST CPU + EEPROM – Our EZBoard is powered by a Genuine ST Micro F4 series CPU running at 168mhz with a whopping 1MB of flash memory. We also have a dedicated 4K EEPROM chip for your EEPROM settings. Unlike other companies who are swapping CPUs to lesser brands we guarantee that our boards come with a real STM32 CPU and not a clone.
Trinamic Drivers – The drivers are Trinamic TMC2209 drivers that provide up to 2A per motor of continuous current and are fully configurable from the firmware thanks to the UART connection between the drivers and CPU. Need to change motor current or mode? You can do it right from the LCD or Gcode.
The EZBoard V2 has been in development for almost a year now and we’ve racked up over 1000 hours of print time on them before ever selling a single one. We’ve performed extensive testing on these boards to make sure thermals are good and there are no electrical issues. You have our word and promise that we will not sell you a board that is not done.
Many vendors that sell cheap boards in the 3D printing market have a history of selling boards that have major issues and/or are not even 100% working when they are sold. Here at TH3D, we believe in selling products that are 100% working and not using our customers as guinea pigs to test things out.
Our board runs our popular Unified 2 as well as other 3rd party firmware like Marlin 2 and Klipper.
CR-10 (Regular, Mini, S4 S5)
CR-10S (Regular, Mini, S4 S5) – Usually needs Creality Dual Cable LCD Adapter (addon above)
If your CR-10S LCD has an EXP3 plug on it then you do NOT need the Dual Cable LCD adapter.
Does NOT work with Touch Screen Models
CR-10 V2 and CR-10 V3 are not supported due to mounting differences with the stock board
CR-20 – Needs CR-20 specific Dual Cable LCD Adapter (addon above)
Ender 2
Ender 2 Pro – Requires cable adapter kit
Ender 3/3 Pro
Ender 3 V2 – Needs LCD swapped.
See here for details: Ender 3 V2 – Swapping to the 12864 Creality LCD for more features – TH3D Studio LLC
Ender 3 MAX
Both layer fans will need to be spliced to use one connector as our board has one header for the layer fan.
Ender 5/5 Pro
Ender 5 Plus – Needs other addons/upgrades listed below
Needs the 12864 LCD Conversion Kit and the Creality Dual Cable LCD adapter (addon above)
Does NOT work with the stock Touch Screen, only with the 12864 LCD Conversion linked above
Ender 6
Needs the 12864 LCD Conversion Kit
Does NOT work with the stock Touch Screen, only with the 12864 LCD Conversion linked above. NOTE the SD slot is on this board so the stock extension will not work. You can use a SD Extension to extend it and replace the stock SD extension. This SD extension works with the Ender 6 SD Extension Adapter Plate that we made.
Sovol SV01
Sovol SV01 Pro
Requires 12864 LCD Conversion Kit
Does NOT work with the stock Touch Screen, only with the 12864 LCD Conversion linked above
Sovol SV03
Sovol SV06 – Requires extra wiring for the stock ABL sensor.
You can re-wire and modify the stock ABL 5 pin plug or use jumper wires to make the connection. See here for details and pictures: https://support.th3dstudio.com/helpcenter/ezboard-v2-sovol-sv06-stock-abl-sensor-wiring/
Note that this is only required for the stock ABL sensor. If you are also converting to our EZABL kit then you will not need to use the stock ABL sensor plug.
V2+ Edition –Â Includes EZBoard V2, MiniUSB Cable, and 4GB MicroSD Card
CPU – STM32F405RGT6 – 168mhz, 32-Bit, 1MB Flash, 192K RAM
Official Firmware – TH3D Unified 2 (Based on Marlin 2)
3rd Party Firmware Support** – Marlin 2.X+, Klipper
Voltage Compatibility – 12-24V DC Input
PCB – 4 Layers, 2oz Copper every layer
Stepper Drivers – 4x Trinamic TMC2209 in UART Mode – 2A RMS, 2.8A Peak Output, Sensorless homing capable
Hotend Output – Up to 8A Max Load*
Heated Bed Output – Up to 13A Max Load*
2x Fan Outputs – Up to 2A Max Load*
Filament Sensor Port –Â Works with our EZOut sensor and OEM Creality/Sovol sensors
NeoPixel Port –Â Onboard port for powering up to 2A of 5V NeoPixels directly from the board
BL Touch Port – BL Touch (SERVO) header Onboard
5V Rail Isolation – Prevents backfeeding USB power to the PSU input terminal
Other Details & Features
*The EZBoard V2 comes with a 15A main fuse. Exceeding 15A total draw will blow the fuse. Up to 20A fuse can be used for higher load machines.
**Please note that our included technical support is limited to our Unified 2 Firmware as Klipper and Marlin are for advanced setups for advanced users. We do have technical support available at an additional charge for advanced setups or applications that fall outside of the standard product support scope.
Warranty Information
6 Months Warranty -Â Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link. Technical support is limited to the scope of the product itself and not your entire machine.
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.
EZOut Filament Sensor Kit for Creality Ender 3/3 Pro - V4.2.X Boards
EZOut V2 Board - For use with BL Touch or Filament Sensor - CR-20/CR-10S/Tornado/MKS Boards × 1
EZOut V2 Filament Sensor Only - Replacement/Spare × 1
Subtotal: $18.48
Donnie Boger (verified owner) –
After having so many issues with the SKR mini that came in this used ender 3, I decided I needed a new board. I really didn’t want a creality board, so this was my first choice, and I’m glad I did it. Another quality product by Tim and his team.
(2) (0) Watch Unwatch
wmpotts (verified owner) –
This was by far the easiest board swap experience I have ever had. The layouts of the board are almost identical and the same footprint. Setting up the firmware using the online ezfirmware was a welcome treat as well. I have way too many code environments I only use to compile firmware once in a while if ever, taking up room on my hard drive I did not need yet another, Set up was fast and easy very intuitive.
It prints like a dream now quiet smooth and fast. The whole process of the board swap and installing ABL and a filament sensor took about 2 hours and was a pleasure to do everything went just how it says it would in the instructions.
Thank you TH3d
(0) (0) Watch Unwatch
Ken (verified owner) –
This board was easy to put in my Ender 6. With the stock board, the temperatures fluctuated a lot. That went away with this new board. The only downside is it doesn’t appear to work with the lpc176x flash method (which copies the firmware to a micro SD card left in the board and then resets the board to flash the firmware. This is what the plugin recommends as a flash method for STM chips that update via SD card) for the Octoprint firmware updater plugin so I have to use the Marlin BFT flash method. Other than that everything works fine, after putting it in I did a 37-hour print and there were no problems.
(0) (0) Watch Unwatch
John Scancarella (verified owner) –
I am dumbfounded at how great, not only the performance of the MB, but also TH3D’S Firmware support. No one offers this level of support for the general 3D printer who doesn’t know much about compiling firmware. I attempted to use the creality v4.2.7 on my ender 5 plus, and I couldn’t get the z-offset wizard to work at all. I chased the issue for days, finally broke down and purchased the ezboard V2.0. I had this thing up and running in 15 minutes, with fantastic results using TH3D firmware. Just make sure to follow all the directions. I missed the part that firmware.bin must be the file name, no exceptions as I was used to renaming them with creality. Additionally, it’s working great with the BLtouch and micro swiss direct drive hotend.
(1) (0) Watch Unwatch
Albert Pierce (verified owner) –
I have 4 printers and have upgraded all of them to the EZboard V2. I think it’s the best mainboard out there and I don’t mind paying for quality. I’m an engineer and I like the attention to detail this board shows. The stepper drivers are heat sinked through the board, the way they are designed to be. Trinamic publishes data sheets and the other guys don’t bother to read them. That’s not engineering, that’s hacking. Who wants to save their configuration data on an SD card? An EEPROM is the right way and the EZboard V2 has dedicated EEPROM. The price went up when the chip shortage hit, but I paid the higher price and would do so again. If your thinking about getting one, just do it. You won’t be disappointed.
(2) (0) Watch Unwatch
dalej608 (verified owner) –
Very nice quality board that works well in my Ender 3. Installation and setup was easy using the online instructions and everything came up and worked as expected. I also ordered an EZABL at the same time and added that after I had the board installed and working. The print quality is great and there’s no more of the weird behavior I was getting with the SKR mini. It’s not always true these days but in this case, you really do get what you pay for. The EZBoard is well built and worth the price.
(0) (0) Watch Unwatch
Comrade Crunchy (verified owner) –
I was having an issue with my cr10’s extruder. It was either missing steps or over heating. After giving up trying to adjust the stock board i decided to change out the stepper motor and board. why not, better drivers and start off fresh. It went from doing half a benchy to acting like its no big. These drivers are so quiet. The board is very easy to use and a lot of quality of life upgrades over the stock board. Can’t wait to do my ender 3.
(0) (0) Watch Unwatch
matt-9365 (verified owner) –
Got tired of the loud motors on the Ender 5 plus after about a week. figured it was time to start modding it. This board and the easy to modify firmware made this printer work great! Don’t even waste your time on the creality board.
(0) (0) Watch Unwatch
li4nost (verified owner) –
Easy swap for Cr10s, awesome support as ussual.
Nothing to say TH3d=quality.
Thanks for that!!!
(0) (0) Watch Unwatch
3d-2109 (verified owner) –
Unfortunately, I have a lot of experience with those junk SKR boards out of China. Right now, I’m sitting at a 50% failure rate on them. When my brand new Ender 5 Plus just wasn’t playing nice, I decided to ditch the Creality board and try one of these.
While I LOVE dinking around in Marlin, I need my printer up and running ASAP. I installed the board, installed the firmware and VIOLA! I was printing high quality parts. I dialed in the steps and now it’s all spot-on! Thanks TH3D!
(0) (0) Watch Unwatch
Emerson Corder (verified owner) –
Great board, fast, and super reliable. You may be paying more than other brands, but that’s because you are getting quality hardware, components, design, and actual customer service here in the states.
(0) (0) Watch Unwatch