TH3D EZBoard V2 – For Creality/Sovol Printers – Unified 2, Marlin, & Klipper
$99.99
-
Genuine STM32 F4 CPU @ 168mhz, Trinamic 2209 Drivers, EZFirmware Compatible, Tech Support Included, Hotend & Bed Thermistor VIN Short Protection, Running TH3D Unified 2.0 Firmware
14 in stock
| Quantity | Price |
|---|---|
| 0 - 3 | $99.99 |
| 4 + | $94.99 |
Description
High-Quality, Packed with Features, Easy to Use, & Technical Support
Our EZBoard V2 is the latest board from us at TH3D Studio. This board is a drop-in replacement for many printer models from Creality and Sovol. To verify compatibility see the Supported Printer list below.
If you are looking for a high-quality, reliable board that doesn’t require you to know programming to use, then this is the board for you.
Unmatched Support – In addition to being physically made well, we also provide 1 on 1 technical support through our TH3D Help Desk and TH3D Live Chat.
Lifetime Firmware Updates – Our EZBoard builds in our Unified 2 Firmware suite will remain 100% free for all EZBoard customers.
Painless Firmware Updates – We also have an exclusive firmware website, called EZFirmware, that allows you to compile firmware without ever touching VSCode or complicated programming options.
Build Quality – We use only high-quality and original parts on our boards and our PCB is 4 layers with 2oz copper on every layer. Our screw terminals are from Phoenix Contact. The other components on our boards are name-brand with tight tolerances. This means your EZBoard will last for years to come and give you a reliable board for your printer.
Genuine ST CPU + EEPROM – Our EZBoard is powered by a Genuine ST Micro F4 series CPU running at 168mhz with a whopping 1MB of flash memory. We also have a dedicated 4K EEPROM chip for your EEPROM settings. Unlike other companies who are swapping CPUs to lesser brands we guarantee that our boards come with a real STM32 CPU and not a clone.
Trinamic Drivers – The drivers are Trinamic TMC2209 drivers that provide up to 2A per motor of continuous current and are fully configurable from the firmware thanks to the UART connection between the drivers and CPU. Need to change motor current or mode? You can do it right from the LCD or Gcode.
Tested in-house, Not on Customers
The EZBoard V2 has been in development for almost a year now and we’ve racked up over 1000 hours of print time on them before ever selling a single one. We’ve performed extensive testing on these boards to make sure thermals are good and there are no electrical issues. You have our word and promise that we will not sell you a board that is not done.
Many vendors that sell cheap boards in the 3D printing market have a history of selling boards that have major issues and/or are not even 100% working when they are sold. Here at TH3D, we believe in selling products that are 100% working and not using our customers as guinea pigs to test things out.
Compatible with Multiple Firmwares
Our board runs our popular Unified 2 as well as other 3rd party firmware like Marlin 2 and Klipper.
Supported Printers
CR-10 (Regular, Mini, S4 S5)
CR-10S (Regular, Mini, S4 S5) – Usually needs Creality Dual Cable LCD Adapter (addon above)
If your CR-10S LCD has an EXP3 plug on it then you do NOT need the Dual Cable LCD adapter.
Does NOT work with Touch Screen Models
CR-10 V2 and CR-10 V3 are not supported due to mounting differences with the stock board
CR-20 – Needs CR-20 specific Dual Cable LCD Adapter (addon above)
Ender 2
Ender 2 Pro – Requires cable adapter kit
Ender 3/3 Pro
Ender 3 V2 – Needs LCD swapped.
See here for details: Ender 3 V2 – Swapping to the 12864 Creality LCD for more features – TH3D Studio LLC
Click here for the LCD Conversion kit: Creality Ender 3 V2 12864 LCD Conversion/Upgrade Kit
Ender 3 MAX
Both layer fans will need to be spliced to use one connector as our board has one header for the layer fan.
Ender 5/5 Pro
Ender 5 Plus – Needs other addons/upgrades listed below
Needs the 12864 LCD Conversion Kit and the Creality Dual Cable LCD adapter (addon above)
Does NOT work with the stock Touch Screen, only with the 12864 LCD Conversion linked above
Ender 6
Needs the 12864 LCD Conversion Kit
Does NOT work with the stock Touch Screen, only with the 12864 LCD Conversion linked above. NOTE the SD slot is on this board so the stock extension will not work. You can use a SD Extension to extend it and replace the stock SD extension. This SD extension works with the Ender 6 SD Extension Adapter Plate that we made.
BLTouch/CRTouch Support – If using a BLTouch/CRTouch with our board and the Ender 6 you will need to wire the sensor directly to our control board, using the Ender 6 breakout board is NOT supported.
Sovol SV01
Sovol SV01 Pro
Requires 12864 LCD Conversion Kit
Does NOT work with the stock Touch Screen, only with the 12864 LCD Conversion linked above
Sovol SV03
Sovol SV06 – Requires extra wiring for the stock ABL sensor.
You can re-wire and modify the stock ABL 5 pin plug or use jumper wires to make the connection. See here for details and pictures: https://support.th3dstudio.com/helpcenter/ezboard-v2-sovol-sv06-stock-abl-sensor-wiring/
Note that this is only required for the stock ABL sensor. If you are also converting to our EZABL kit then you will not need to use the stock ABL sensor plug.
Technical Specifications
CPU – STM32F405RGT6 – 168mhz, 32-Bit, 1MB Flash, 192K RAM
Official Firmware – TH3D Unified 2 (Based on Marlin 2)
3rd Party Firmware Support** – Marlin 2.X+, Klipper
Voltage Compatibility – 12-24V DC Input
PCB – 4 Layers, 2oz Copper every layer
Stepper Drivers – 4x Trinamic TMC2209 in UART Mode – 2A RMS, 2.8A Peak Output, Sensorless homing capable
Hotend Output – Up to 8A Max Load*
Heated Bed Output – Up to 13A Max Load*
2x Fan Outputs – Up to 2A Max Load*
Filament Sensor Port – Works with our EZOut sensor and OEM Creality/Sovol sensors
NeoPixel Port – Onboard port for powering up to 2A of 5V NeoPixels directly from the board
BL Touch Port – BL Touch (SERVO) header Onboard
5V Rail Isolation – Prevents backfeeding USB power to the PSU input terminal
Strong USB Port – We use a through hole MiniUSB port to match OEM boards this replaces as well as high strength versus MicroUSB or other surface mount port options.
Other Details & Features
- Onboard 4K EEPROM Chip
- Onboard Dual Z Motor Output headers (parallel)
- Hotend Thermistor VIN short protection
- Bed Thermistor VIN short protection
- Flyback Diodes on all MOSFETS
- Serial Header Onboard
*The EZBoard V2 comes with a 15A main fuse. Exceeding 15A total draw will blow the fuse. Up to 20A fuse can be used for higher load machines.
**Please note that our included technical support is limited to our Unified 2 Firmware as Klipper and Marlin are for advanced setups for advanced users. We do have technical support available at an additional charge for advanced setups or applications that fall outside of the standard product support scope.
Manuals and Firmware
Reviews (30)
30 reviews for TH3D EZBoard V2 – For Creality/Sovol Printers – Unified 2, Marlin, & Klipper
Add a review
Additional information
| Weight | 12 oz |
|---|---|
| Dimensions | 6 × 4 × 1 in |
| Made In | 🇨🇳 China |
Related products
johnkelly.uk (verified owner) –
This is the very first use of my Ender 5 pro using the new Ezboard v2 and Ezabl 18mm. It’s very near perfect. No tweaks, just the default settings in Cura. That top surface is as smooth as silk. Very impressed. Once I have made some tiny alterations for the next time I slice a model it will be 100% perfect
johnkelly.uk (verified owner) –
When they say quiet that’s exactly what you get.
There are some new features that make the printing experience better than ever. Definitely worth the money
youknee (verified owner) –
Just by looking at it I can tell the quality was miles ahead of my creality board. My creality 427 board had capacitors and other parts that weren’t even touching the board only solder holding them in. This board was easy to install and is working so easily. And the firmware was so easy to get and flash. Love this board it has fixed all my issues so far!! Keep up the great work.
Matt Appleton –
My S4 has a gazillion hours on it. I ended up fighting the issue where the thermistor wigs out only when you are printing but not when it’s just sitting still. Tried wiggling every wire on the machine and couldn’t get it to mess up. Internet says there is a capacitor in the original 8 bit board that has failed and causes the issue. This board checks all the boxes. I like the fact that it is laid out so well and every terminal is properly labeled. I love the 32 bit board with the silent drivers. This board coupled with the TH3D software is all you should ever need. My S4 is printing better than it ever has. The steppers are now so quite that it alarmed me when I saw the machine moving but did not hear anything.
Jeremy Gaggins (verified owner) –
It’s amazing how quiet this made my Ender 5 Plus. The cooling fan now makes more noise than the steppers. Had a bit of minor issues getting it all right, but with a bit of time watching videos and the FAQ I got it figured out. (Wire orders on the stock headers are different and needed changed around, had to change some settings with the BL Touch manually in the firmware, etc…)
With everything tightened up and re-leveled it’s printing better than the day I first put it together.
kat.on.kijiji (verified owner) –
I got this set up in my CR-10 V2 and with help available via the website lit, and some chat support. From someone without a ton of experience with this, and zero with compiling custom firmware, it went real smooth and is working perfectly. Everything about the printer is running way better than it did on the stock board, and the extra options and fine adjustments within have made a world of difference. Already the best level bed test print I’ve ever had with the z-offset babysteps, so I’m looking forward to get on it with legit print project.
james z. (verified owner) –
Second one I have purchased.
Eli (verified owner) –
Works great, awesome product and excellent support on their website
John Rocha (verified owner) –
Absolutely dependable. Nothing but the best and I am running 15 of them.
Jesse M. (verified owner) –
So far so good way better than. Creality or big tree
tom s. (verified owner) –
Install was easy I was in running within a hour
Andrew B. (verified owner) –
William K. (verified owner) –
All of my compatible printers are immediately upgraded to TH3D’s boards. I also install these in friend’s machines. I have bought several of these and TH3D’s Unified firmware with tutorials makes this very easy. Add EZABL and a flex PEI sheet from TH3D and you turn a mundane printer into a reliable superstar! TH3D’s support and quality easily justifies the investment.
Anonymous (verified owner) –
Adam B. (verified owner) –
The board is a fantastic replacement. It is a 100% form match for the screw holes, usb, and microsd card.
Joseph (verified owner) –
Anonymous (verified owner) –
Really like these boards. They are solid. You can feel the weight of the board when you get it in your hand. Setup was a breeze and the support guys were super helpful with any questions I had.
Chaney Goldstein (verified owner) –
I got this board to replace my Creality 4.2.2 board since I wanted something that worked more flawlessly with my other upgrades. This board is awesome! EZNeo lights work perfectly. EZABL is great (though I had to use it on the servio pins instead of the Z-endstop pins). EZOut worked great. And my favorite part is the EZFirmware site! No more VS Code installing and ZIP files to deal with. It’s all done in a web browser which is super cool!
Randy Clements (verified owner) –
It’s boringly reliable, and is exactly what I needed.
Emerson Corder (verified owner) –
Great board, fast, and super reliable. You may be paying more than other brands, but that’s because you are getting quality hardware, components, design, and actual customer service here in the states.
3d-2109 (verified owner) –
Unfortunately, I have a lot of experience with those junk SKR boards out of China. Right now, I’m sitting at a 50% failure rate on them. When my brand new Ender 5 Plus just wasn’t playing nice, I decided to ditch the Creality board and try one of these.
While I LOVE dinking around in Marlin, I need my printer up and running ASAP. I installed the board, installed the firmware and VIOLA! I was printing high quality parts. I dialed in the steps and now it’s all spot-on! Thanks TH3D!
li4nost (verified owner) –
Easy swap for Cr10s, awesome support as ussual.
Nothing to say TH3d=quality.
Thanks for that!!!
Albert Pierce (verified owner) –
I have 4 printers and have upgraded all of them to the EZboard V2. I think it’s the best mainboard out there and I don’t mind paying for quality. I’m an engineer and I like the attention to detail this board shows. The stepper drivers are heat sinked through the board, the way they are designed to be. Trinamic publishes data sheets and the other guys don’t bother to read them. That’s not engineering, that’s hacking. Who wants to save their configuration data on an SD card? An EEPROM is the right way and the EZboard V2 has dedicated EEPROM. The price went up when the chip shortage hit, but I paid the higher price and would do so again. If your thinking about getting one, just do it. You won’t be disappointed.
matt-9365 (verified owner) –
Got tired of the loud motors on the Ender 5 plus after about a week. figured it was time to start modding it. This board and the easy to modify firmware made this printer work great! Don’t even waste your time on the creality board.
Comrade Crunchy (verified owner) –
I was having an issue with my cr10’s extruder. It was either missing steps or over heating. After giving up trying to adjust the stock board i decided to change out the stepper motor and board. why not, better drivers and start off fresh. It went from doing half a benchy to acting like its no big. These drivers are so quiet. The board is very easy to use and a lot of quality of life upgrades over the stock board. Can’t wait to do my ender 3.
dalej608 (verified owner) –
Very nice quality board that works well in my Ender 3. Installation and setup was easy using the online instructions and everything came up and worked as expected. I also ordered an EZABL at the same time and added that after I had the board installed and working. The print quality is great and there’s no more of the weird behavior I was getting with the SKR mini. It’s not always true these days but in this case, you really do get what you pay for. The EZBoard is well built and worth the price.
John Scancarella (verified owner) –
I am dumbfounded at how great, not only the performance of the MB, but also TH3D’S Firmware support. No one offers this level of support for the general 3D printer who doesn’t know much about compiling firmware. I attempted to use the creality v4.2.7 on my ender 5 plus, and I couldn’t get the z-offset wizard to work at all. I chased the issue for days, finally broke down and purchased the ezboard V2.0. I had this thing up and running in 15 minutes, with fantastic results using TH3D firmware. Just make sure to follow all the directions. I missed the part that firmware.bin must be the file name, no exceptions as I was used to renaming them with creality. Additionally, it’s working great with the BLtouch and micro swiss direct drive hotend.
Ken (verified owner) –
This board was easy to put in my Ender 6. With the stock board, the temperatures fluctuated a lot. That went away with this new board. The only downside is it doesn’t appear to work with the lpc176x flash method (which copies the firmware to a micro SD card left in the board and then resets the board to flash the firmware. This is what the plugin recommends as a flash method for STM chips that update via SD card) for the Octoprint firmware updater plugin so I have to use the Marlin BFT flash method. Other than that everything works fine, after putting it in I did a 37-hour print and there were no problems.
Donnie Boger (verified owner) –
After having so many issues with the SKR mini that came in this used ender 3, I decided I needed a new board. I really didn’t want a creality board, so this was my first choice, and I’m glad I did it. Another quality product by Tim and his team.
wmpotts (verified owner) –
This was by far the easiest board swap experience I have ever had. The layouts of the board are almost identical and the same footprint. Setting up the firmware using the online ezfirmware was a welcome treat as well. I have way too many code environments I only use to compile firmware once in a while if ever, taking up room on my hard drive I did not need yet another, Set up was fast and easy very intuitive.
It prints like a dream now quiet smooth and fast. The whole process of the board swap and installing ABL and a filament sensor took about 2 hours and was a pleasure to do everything went just how it says it would in the instructions.
Thank you TH3d